Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Maintenance & Mods (D3)

Red Suspension Light - Dropped to Bump Stop FIX
Post Reply  Down to end
Page 1 of 1
Father Dougal
 


Member Since: 21 Jun 2023
Location: Liverpool
Posts: 15

England 2007 Discovery 3 TDV6 HSE Auto Buckingham BlueDiscovery 3
Red Suspension Light - Dropped to Bump Stop FIX

Thought I'd post this as after a trip off roading despite the car running smoothly all day only showing up intermittent "Yellow" suspension warnings which clear once you reset the car, it was only until being back at the car park about to leave did the "Red" suspension light appear after resetting the car for the drive home.

This as people will be aware puts the car to its bump stops (not great with oversized tyres!) and limits driving to 30mph.

After throwing a jack under multiple sides and raising the vehicle the light changed to "Yellow" and the compressor kicked into life although the front in particular kept dropping once the jack was released.

ID tool indicated a fault with the rear height sensors despite the rear raising and staying up.

After limping to the nearest service station only after taking the front right hand wheel off did it show that the LIFT ROD HAD FELL OFF! Censored

Once it was reattached suspension worked as it should once the compressor had cooled (must have been working overtime all day!)

Now to find a fix to keep the rods in place as the flared end has rusted and clearly not as robust as it once was! Rolling with laughter
 

Last edited by Father Dougal on 9th May 2024 7:27 am. Edited 2 times in total 
Post #23684458th May 2024 7:39 pm
View user's profile Send private message View poster's gallery Reply with quote
loanrangie
 


Member Since: 18 Jun 2017
Location: Melbourne
Posts: 648

Australia 2008 Discovery 3 TDV6 SE Auto Stornoway GreyDiscovery 3

If they are aftermarket rods then put the originals back on and use the Gap tool to raise suspension when required.
  
Post #23684679th May 2024 1:35 am
View user's profile Send private message View poster's gallery Reply with quote
Father Dougal
 


Member Since: 21 Jun 2023
Location: Liverpool
Posts: 15

England 2007 Discovery 3 TDV6 HSE Auto Buckingham BlueDiscovery 3

They are the adjustable TF ones but it wouldn't have made any odds standard or aftermarket, it's the body mount being rusted that caused the issue and hence why they slipped off.

When you compare my Front RHS to all other corners you can clearly see the amount of material that has rusted away. Thumbs Up
  
Post #23684709th May 2024 7:23 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site