AllyLHD
Member Since: 24 Apr 2024
Location: wales
Posts: 2
|
| Cv Joint fitted and Landrover discovery will not drive |
|
Hi,
Okay, hubby fitted a new CV joint kit (outer joint) to Landrover Discovery 3. It's an automatic gearbox. The part did not come off easy at all. He said he ended and hitting it with a hammer. Got it off and re-fitted the new part. Said it seated fine. Took it off the drive, 100 yards if that, and the car then refused to drive, go into reserve, or into park mode. Sounds like a box of spanners when placed into reserve, I might add. Any ideas about what damage has been caused? I understand this is going to be painful. Any advice would be appreciated.
|
 24th Apr 2024 12:32 pm |
|
|
Grumpydog
Member Since: 10 Apr 2019
Location: Medway/ Mos Eisley
Posts: 164
 
|
Check that the shaft hasn't come out of the inner joint, quite easy to dislodge it when removing the outer joint. The noise will be the joint spinning but the shaft not. 2004 Disco 3 HSE TDV6
2015 Audi Q5 S Line plus
2008 Audi A4 Avant S Line Black Edition. Gone
2005 Chrysler Grand Voyger. Gone
|
| 24th Apr 2024 12:39 pm |
|
|
AllyLHD
Member Since: 24 Apr 2024
Location: wales
Posts: 2
|
Okay, he's going out to look at it now. Thank you
|
| 24th Apr 2024 12:47 pm |
|
|
