Ceekay
Member Since: 17 May 2009
Location: Bury
Posts: 2089
  
|
Just a quick question in ref my altox, can I not get the fbh to run for more than 20mins? I know this is the factory setting but thought the altox would over ride this. When i set the altox for more than 20 mins the cabin fans stay on but the flame on the fbh ceases at around 20 mins while the fan remains on eventually blowing cooler air as the fbh temp drops back off.
I can only get the temp gauge to half way up the cold block at the bottom of the gauge at best at the mo.
Any feedbak appreciated  D4 HSE Lux MY16 Club Waitomo
D3 HSE MY06 missing her still…
|
 12th Mar 2019 10:40 am |
|
|
kevofcov
Member Since: 06 Nov 2007
Location: Other end of M69
Posts: 571
 
|
Exactly the same problem here. Bit disappointing tbh.
Did you ever resolve the issue?
|
| 2nd Dec 2023 9:59 am |
|
|
kevofcov
Member Since: 06 Nov 2007
Location: Other end of M69
Posts: 571
|
Just learnt my Altox will let me run again straight after the cycle is finished. Not solving the limit but is a work around.
|
| 18th May 2024 7:56 am |
|
|
