Holmkiern
Member Since: 16 Jul 2017
Location: Upphärad,west coast
Posts: 65
  
|
Hi all,
I got a noise since some months ago in front. It is 1 hard "hit" or clonk per turn of the wheel. Estimated it was from front left and it was a bit wear in joints so I changed left drive shaft. Noise still there.
Lifted car and is a small click on right drive shaft/differential but when doing same check on new drive shaft side,it clicks the same when turning wheel front and reverse.
Funny(!) part is that when drivning and turning left,noise is gone.
Bearing or differential?
Noise is to hard to be the bearing or? Should be a whining noise if bearing.
Any advise is appriciated since my friend,wallet is beeing fed up with disco..🤨
Regards Johnny
|
 27th Feb 2024 5:45 pm |
|
|
kim0785b
Member Since: 12 Feb 2021
Location: London
Posts: 141
  
|
Have you check called your bushings and ball joints? Could be the issue. Discovery 4
Oct 2015, 2016 build
SDV6 Santorini Black SE
New engine at 42k
Car camper
|
| 6th Mar 2024 8:31 am |
|
|
pjm-84
Member Since: 04 Oct 2016
Location: Hampshire
Posts: 2580
|
Bearing....if one way but not the other
|
| 6th Mar 2024 9:24 am |
|
|
kim0785b
Member Since: 12 Feb 2021
Location: London
Posts: 141
|
Ah if one way then wheel bearing correct! Best to replace both at the same time. Discovery 4
Oct 2015, 2016 build
SDV6 Santorini Black SE
New engine at 42k
Car camper
|
| 6th Mar 2024 10:10 am |
|
|
Holmkiern
Member Since: 16 Jul 2017
Location: Upphärad,west coast
Posts: 65
|
Well,it was wheel bearing..has only been 20000km since I changed it last time..b***part crap.
|
| 10th Mar 2024 7:52 pm |
|
|
