Member Since: 30 Nov 2022
Location: By the sea
Posts: 6
Puddins of a MAF sensor
Hi Guys,
Has anybody opened/got the probes out of a MAF sensor? I'm trying to open one and insert the probe from an old RRSport. It seems to be a sealed unit but maybe something like a Dremmel?
15th Dec 2023 8:14 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4927
It's the same MAF sensor for the RR Sport and Discovery 2.7 TDV6, why not just swap over?yµ (idµ - eAµ) ψ=mψ
15th Dec 2023 8:52 pm
Doomed
Member Since: 30 Nov 2022
Location: By the sea
Posts: 6
Haven't done a side by side yet but the new one feels much bigger. I'll have a right look tomorrow
15th Dec 2023 10:50 pm
Doomed
Member Since: 30 Nov 2022
Location: By the sea
Posts: 6
Yes, it was exactly the same sensor. Still reading 0g/m² at any revs. Van drives far better. Computer says intermittent fault in circuit. Fuses 17 and 13 are in place and good. Check engine light no longer coming on at idle but does come on at operating temp. Where to next
16th Dec 2023 12:54 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10558
what code reader are you using.
what fault code and description are you getting ?
16th Dec 2023 5:25 pm
Doomed
Member Since: 30 Nov 2022
Location: By the sea
Posts: 6
P0100 mass airflow sensor circuit intermittent fault. Using an old Lynx that came with the van. It shows 12.75volts on red/blue wire and about 3.5 on two others and 0 on black at the plug. It could be that the s/h sensor is broken too. Is there any test for the unit itself.
Thanks
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum