Member Since: 16 Aug 2012
Location: Cheshire
Posts: 83
Seat Belt Retractor
Hi Everyone,
Ratehr frustratingly, My D4 Drivers seat belt doesnt retract as it should, meaning I have shut the chuffin' metal part in the door numerous times!!!
It still works as it should if you pull it forward (Actually passed its MOT with it) but I am totally fed up with shutting it in the door.
I have asked a garage to quote to replace but they arent exactly motivated and I wondered if it was an easy fix to replace myself?
Also, anyone know where I can order a new one from??
Thanks
15th Mar 2023 11:45 am
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4523
There are a number of threads on here about seat belts not retracting. My prefered fix is to pull all of the seat belt out, and spray some silicone lubricant on both sides of the webbing. Wipe over with a cloth as it retracts. Pull the belt out a few times and it'll be as good as new. Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
15th Mar 2023 12:08 pm
Lazydave
Member Since: 07 Jul 2019
Location: Birmingham
Posts: 87
As above.2010 HSE
Full service genuine parts.
Front and rear pads.
Turbo oil drain pipe mod.
LED interior lights upgrade.
Both rear door actuators.
Tailgate handle/ switch.
Facelift grille and rear lights.
Fitted cross bars.
New rear discs and pads.
New RH inlet manifold.
New air con condensor.
New battery.
New EGR pipe.
New front discs and pads.
New propshaft.
15th Mar 2023 6:29 pm
cassiusgray
Member Since: 24 Nov 2023
Location: Saint Jean d'Aulps
Posts: 13
I'm just about to buy a D4 with this issue on the driver side so this thread is invaluable! It's one of the first jobs I'll be doing. Thank you
26th Nov 2023 4:38 pm
HairyFool
Member Since: 04 Jan 2023
Location: North Essex
Posts: 684
I have removed a belt reel in the past for this very problem. It is possible to disassble the reel but the inertia locks are a pain and it very easy to lose the pins.
Despite it appearing to be very weak rewinding the belt the coil sping is in fact very strong. I was able to increase the pull and fix the problem but I think it was very 50-50 if it was that that fixed it or cleaning and lubing it.A visitor from the dark side, my other vehicle is an is still an EV. Strictly speaking its SWMBO.
27th Nov 2023 1:17 pm
cassiusgray
Member Since: 24 Nov 2023
Location: Saint Jean d'Aulps
Posts: 13
I have gone ahead and purchased silicon spray. I will report back once I pick the car up!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
