Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Webasto Fuel Burning Heater

FBH starts with IID but not with WTT
Post Reply  Down to end
Page 1 of 1
Skagg
 


Member Since: 15 May 2015
Location: Not where i'd like to be
Posts: 1043

United Kingdom 2016 Discovery 4 3.0 SDV6 Landmark LE Auto Yulong WhiteDiscovery 4
FBH starts with IID but not with WTT

So I thought I'd give the Icemaiden a blow out before winter is upon us. Went to run the FBH via the IID & got E7 error the first time around. Second time it fired up albeit a bit smoky. I thought i'd use the WTT software to run the burner manually for longer to burn off the excess diesel. However, I can connect to the FBH but when I click parking heater in the control nothing more happens. The kit use to work fine on the D3 with 2.14. I see that 2.61 is recommended for a D4 so tried that but no difference.

Any ideas?



Cheers n Gone Nick Thumbs Up
 MY16 D4 Landmark SDV6 (The Ice Maiden)
Uncle Ray's spare wheel protector
MY08 D3 HSE Stornoway (Miss Moneypit) The money tree withered...... 
 
Post #23497676th Oct 2023 1:54 pm
View user's profile Send private message View poster's gallery Reply with quote
Skagg
 


Member Since: 15 May 2015
Location: Not where i'd like to be
Posts: 1043

United Kingdom 2016 Discovery 4 3.0 SDV6 Landmark LE Auto Yulong WhiteDiscovery 4

Just following up my own thread here. Since posting I've also purchased a breakout lead & tried Robbies method of connection with the loom in place & using probe pins. I've tried all versions of WTT up & including 3.6. I can connect in every instance, but not start the FBH with WTT. I note that Robbies test was on a MY13, is there something different about a MY16 that prevents this method of test from working?

Cheers n Gone Nick Thumbs Up
 MY16 D4 Landmark SDV6 (The Ice Maiden)
Uncle Ray's spare wheel protector
MY08 D3 HSE Stornoway (Miss Moneypit) The money tree withered...... 
 
Post #235012711th Oct 2023 11:12 am
View user's profile Send private message View poster's gallery Reply with quote
Bracechenko
 


Member Since: 29 Jun 2021
Location: Cardiff
Posts: 183

Wales 2006 Discovery 3 TDV6 GS Auto Stornoway GreyDiscovery 3

Hi Skagg,

Not sure if this helps but when I run diagnostics on WTT, I use the Auxiliary Heater program and not the Parking Heater program. Not sure if that makes any difference for you?

Mike
  
Post #235442329th Nov 2023 6:59 pm
View user's profile Send private message View poster's gallery Reply with quote
Skagg
 


Member Since: 15 May 2015
Location: Not where i'd like to be
Posts: 1043

United Kingdom 2016 Discovery 4 3.0 SDV6 Landmark LE Auto Yulong WhiteDiscovery 4

I gave in up the end after trying various combinations. I then remembered I could trigger it through the manual timer which was enough to clear the FBH. Now it runs clean when either manually started or automatically.. still unable to start it using the WTT SW though.

Cheers n Gone Nick
 MY16 D4 Landmark SDV6 (The Ice Maiden)
Uncle Ray's spare wheel protector
MY08 D3 HSE Stornoway (Miss Moneypit) The money tree withered...... 
 
Post #235442429th Nov 2023 7:02 pm
View user's profile Send private message View poster's gallery Reply with quote
Worms
 


Member Since: 24 Sep 2023
Location: Highlands
Posts: 394

Scotland 2005 Discovery 3 TDV6 Base 7 Seat Auto Zambezi SilverDiscovery 3

Glad yours is working. I'm stumped with mine at the moment - works fine on the IID tool and also with the WTT link. It just doesn't seem to want to work on its own! It did fire up one morning in October, but not since then. I've ordered up a remote switch in the hope that I can manually start it on these cold mornings.
 Previously:
2010 FL2 TD4e GS
‘93 Defender 110 200TDi CSW - still got this, non-runner on SORN.
‘87 Defender 90 4 cyl Petrol
‘83 110 CSW V8 - best ever!
Range Rover 2-door V8 (not sure of year - 4-speed box and vacuum diff switch)
Series III SWB Diesel 
 
Post #235442529th Nov 2023 7:31 pm
View user's profile Send private message View poster's gallery Reply with quote
Bracechenko
 


Member Since: 29 Jun 2021
Location: Cardiff
Posts: 183

Wales 2006 Discovery 3 TDV6 GS Auto Stornoway GreyDiscovery 3

So here's something that doesn't seem to appear too often but it's an absolute verified fact.... the FBH only attempts to fire automatically if you've put the car heating on.

Honestly, it's true! I've seen someone else post this before also and I've confirmed it on my vehicle but for some reason it's not well known and not mentioned in the literature. Perhaps it's model or year specific but my D3 is MY07 and this is 100% the case.

If you still don't believe be, plug in your IID tool, open live values for auxiliary heater for things like glow plug, fuel pump and water pump etc... you'll see that they remain off until you activate the climate controls in the car (requesting heat) and then it gets a signal to fire.

Of course, this only works assuming the well known criteria of 5 degrees or less, not on reserve fuel is in place etc etc.
  
Post #235442729th Nov 2023 8:08 pm
View user's profile Send private message View poster's gallery Reply with quote
Worms
 


Member Since: 24 Sep 2023
Location: Highlands
Posts: 394

Scotland 2005 Discovery 3 TDV6 Base 7 Seat Auto Zambezi SilverDiscovery 3

I always understood that it was the A/C that had to be on, or at least on the eco setting. Not that this would be my issue - living in the frozen north, there are very few times when the heating is not on! Smile
 Previously:
2010 FL2 TD4e GS
‘93 Defender 110 200TDi CSW - still got this, non-runner on SORN.
‘87 Defender 90 4 cyl Petrol
‘83 110 CSW V8 - best ever!
Range Rover 2-door V8 (not sure of year - 4-speed box and vacuum diff switch)
Series III SWB Diesel 
 
Post #235444329th Nov 2023 10:05 pm
View user's profile Send private message View poster's gallery Reply with quote
Raf Verjans
 


Member Since: 14 Jan 2022
Location: Bilzen
Posts: 13

Belgium 2005 Discovery 3 TDV6 S Auto Tonga GreenDiscovery 3
FBH won't fire-up when starting the car

Hi all

Tried with my IID: works fine - tried with WTT-software: fault given is 88h.

Took it to a Webasto-dealer: apparently nothing can be done for a WTT V, because it's exclusively for LR-dealers. He's unable to read faultcodes an spare parts for this particular device are unavailable.

Tank is full.

I'm a bit out of options here and I can't find a thread that deals with this issue.

Any advice would be welcome !
  
Post #235448830th Nov 2023 10:39 am
View user's profile Send private message View poster's gallery Reply with quote
Bracechenko
 


Member Since: 29 Jun 2021
Location: Cardiff
Posts: 183

Wales 2006 Discovery 3 TDV6 GS Auto Stornoway GreyDiscovery 3

Worms wrote:
I always understood that it was the A/C that had to be on, or at least on the eco setting. Not that this would be my issue - living in the frozen north, there are very few times when the heating is not on! Smile


The reason that this always caught me out is that I don't bother putting the heating on until the engine is warm as what's the point!? Well, the engine rarely got warm tootling around town without the FBH assisting and I've not long learned that the FBH doesn't fire without the heating on FFS! Banging Head Laughing
  
Post #235448930th Nov 2023 10:46 am
View user's profile Send private message View poster's gallery Reply with quote
Bracechenko
 


Member Since: 29 Jun 2021
Location: Cardiff
Posts: 183

Wales 2006 Discovery 3 TDV6 GS Auto Stornoway GreyDiscovery 3
Re: FBH won't fire-up when starting the car

Raf Verjans wrote:
Hi all

Tried with my IID: works fine - tried with WTT-software: fault given is 88h.

Took it to a Webasto-dealer: apparently nothing can be done for a WTT V, because it's exclusively for LR-dealers. He's unable to read faultcodes an spare parts for this particular device are unavailable.

Tank is full.

I'm a bit out of options here and I can't find a thread that deals with this issue.

Any advice would be welcome !


Hi Raf and Willkommen Very Happy

https://www.disco3.co.uk/wiki/Fuel_Burning_Heater

Plenty of good info in the link above and many threads on this forum for the FBH including servicing guides which I would search for.

Best of luck
Brace
  
Post #235449030th Nov 2023 10:48 am
View user's profile Send private message View poster's gallery Reply with quote
Worms
 


Member Since: 24 Sep 2023
Location: Highlands
Posts: 394

Scotland 2005 Discovery 3 TDV6 Base 7 Seat Auto Zambezi SilverDiscovery 3

Bracechenko wrote:
Worms wrote:
I always understood that it was the A/C that had to be on, or at least on the eco setting. Not that this would be my issue - living in the frozen north, there are very few times when the heating is not on! Smile


The reason that this always caught me out is that I don't bother putting the heating on until the engine is warm as what's the point!? Well, the engine rarely got warm tootling around town without the FBH assisting and I've not long learned that the FBH doesn't fire without the heating on FFS! Banging Head Laughing


Moving to the D3 from the FL2, I am used to pressing the "Prog" button whenever it is properly cold, as that switched on the electric boost heater which LR introduced in place of the Webasto. So the concept of the car needing to request heat was already ingrained! Smile
 Previously:
2010 FL2 TD4e GS
‘93 Defender 110 200TDi CSW - still got this, non-runner on SORN.
‘87 Defender 90 4 cyl Petrol
‘83 110 CSW V8 - best ever!
Range Rover 2-door V8 (not sure of year - 4-speed box and vacuum diff switch)
Series III SWB Diesel 
 
Post #23545831st Dec 2023 6:32 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site