Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Maintenance & Mods (D4)

Offroad Rear Bumper for Disco 4?
Post Reply  Down to end
Page 1 of 1
Ian_6301
 


Member Since: 14 Dec 2020
Location: Rugby
Posts: 3

United Kingdom 2012 Discovery 4 3.0 SDV6 HSE Auto Santorini BlackDiscovery 4
Offroad Rear Bumper for Disco 4?

Afternoon all,

Long time lurker, first time new thread, so bear with...

I do quite a bit of offroading in by D4, generally as part of the MROC 4x4 Response group, or competing in the British Army Motorsport Off Road navigation series. These latter include some very straightforward (or not in a fully laden D4) RTV type trials sections. This is also my Daily Driver.

Twice in the last year, the departure angle from an obstacle has been such that the rear bumper has detached from the lower brackets and I've had to finagle the thing back into the clips on the rear wings.

Finally, last month at MudMaster, the bumper came almost all the way off, taking the lower tailgate trim section with it. I've now carefully removed the bumper, rear halves of the wheel arch trims and a couple of other sundries, made the necessary repairs where possible and ordered new brackets where impossible to repair.

I am, however, a bit cheesed off with all this. I'm running OffRoad height, with an extra 50mm courtesy of the EasyLift module when this happens, and in theory should have clearance for days, but the evidence suggests otherwise.

I've only ever seen one offroad rear bumper for a D4, and it's this one

Click image to enlarge


The only issues are that it costs about £1,500 in its most basic (but powder coated) form, it weighs about 50kg and it's only sold in the United States of Gun Totin' Misogynist "Freedom"...

Is anyone aware of a similarly up-armoured rear bumper, available in the UK and not ridiculously expensive?

Many Thanks in advance!
 MROC
MROC 4x4 Response
NHS Volunteer Driver - South Warkwickshire Foundation Trust
British Army Motorsport Association 
 
Post #235308614th Nov 2023 2:46 pm
View user's profile Send private message View poster's gallery Reply with quote
Tyty
 


Member Since: 18 Aug 2022
Location: South West
Posts: 81

United Kingdom 2014 Discovery 4 3.0 SDV6 HSE Auto Fuji WhiteDiscovery 4

I'm not aware of any in the UK, but i'd imagine a competant metal fabrication workshop would design and fabricate something similar even with a bit of customisation for less than that?
  
Post #235309614th Nov 2023 3:45 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site