Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Maintenance & Mods (D4)

Consistant shuddering after drive shaft removed
Post Reply  Down to end
Page 1 of 1
brsc2909
 


Member Since: 15 Jan 2020
Location: Dublin
Posts: 24

Ireland 2007 Discovery 3 TDV6 SE Auto Barolo BlackDiscovery 3
Consistant shuddering after drive shaft removed

My front driverside driveshaft went on me the other day driving home (disco 3 TDV6 automatic) I had to remove it completely and rely on the rear wheel drive to get me home. there was a consistand shuddering about once per second but only when accelerating. when I took the foot of the throttle it went away. My Thought (hopes) are that this is the traction control trying to send power to the other wheel but I'm conserned it might be something more serious. Any thought on this? might I have destroyed the gearbox or transfer box?

The cadence of the shuddering appears to coincide with the speed/rpm. in second gear as I accelorated the cadence seemed to increase but wasnt exactly linear with speed as in i didnt seem to be twice as often as my speed doubled.

has anyone had to do this before to get home and what happened?

Regards
Brendan
  
Post #234386631st Jul 2023 11:31 am
View user's profile Send private message View poster's gallery Reply with quote
PROFSR G
 


Member Since: 06 Mar 2017
Location: Lost
Posts: 5044

Ukraine 2009 Discovery 3 TDV6 Commercial XS Auto Stornoway GreyDiscovery 3

It really shouldn't have been driven with a shaft missing as the front diff would have been under considerable pressure constantly looking to balance the output speeds. Traction control as well as ABS would also been out of whack.

All you can do now is to put another shaft in it and see how things are then. Hopefully you got away with it!
 yµ (idµ - eAµ) ψ=mψ

 
 
Post #234388131st Jul 2023 12:49 pm
View user's profile Send private message View poster's gallery Reply with quote
disco chris
 


Member Since: 25 Apr 2022
Location: London
Posts: 282

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Buckingham BlueDiscovery 3

I am guessing if the shaft is removed, there is also going to be very little oil in the diff too... ?
  
Post #234389031st Jul 2023 2:01 pm
View user's profile Send private message View poster's gallery Reply with quote
L319
 


Member Since: 14 Dec 2013
Location: Herefordshire
Posts: 2083

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Buckingham BlueDiscovery 3

The centre diff would have to lock up to drive the rear end on its own so that will have had a hard time as well .
  
Post #234389231st Jul 2023 2:06 pm
View user's profile Send private message View poster's gallery Reply with quote
brsc2909
 


Member Since: 15 Jan 2020
Location: Dublin
Posts: 24

Ireland 2007 Discovery 3 TDV6 SE Auto Barolo BlackDiscovery 3

disco chris wrote:
I am guessing if the shaft is removed, there is also going to be very little oil in the diff too... ?


No I split the shaft and left the inner part attached to the diff
  
Post #234390531st Jul 2023 3:36 pm
View user's profile Send private message View poster's gallery Reply with quote
M3DPO
 


Member Since: 22 Sep 2010
Location: Notts.
Posts: 8227

England 2014 Discovery 4 3.0 SDV6 HSE Lux Auto Corris GreyDiscovery 4

The abs will be thinking the wheel you have removed the shaft from is spinning and will apply the traction control (ABS) on that wheel as there is no resistance particularly when starting off or accelerating, hence the thumping as the brake on that wheel is rapidly applied on and off, definitely not an recommended procedure. I’m surprised you could move at all.
 It can when others can't,
It will when others won't,
It goes where others don't. 
 
Post #234391831st Jul 2023 5:47 pm
View user's profile Send private message View poster's gallery Reply with quote
brsc2909
 


Member Since: 15 Jan 2020
Location: Dublin
Posts: 24

Ireland 2007 Discovery 3 TDV6 SE Auto Barolo BlackDiscovery 3

Looks like i dodged a bullet. Put the new driveshaft in today and she's driving perfectly. but given the comment's here I think i'd get it towed if it ever happens again.
  
Post #23443294th Aug 2023 12:33 pm
View user's profile Send private message View poster's gallery Reply with quote
PROFSR G
 


Member Since: 06 Mar 2017
Location: Lost
Posts: 5044

Ukraine 2009 Discovery 3 TDV6 Commercial XS Auto Stornoway GreyDiscovery 3

Change the diff oils and the transfer box oil.
 yµ (idµ - eAµ) ψ=mψ

 
 
Post #23443404th Aug 2023 2:08 pm
View user's profile Send private message View poster's gallery Reply with quote
M3DPO
 


Member Since: 22 Sep 2010
Location: Notts.
Posts: 8227

England 2014 Discovery 4 3.0 SDV6 HSE Lux Auto Corris GreyDiscovery 4

The offside or drivers side does not have a brake pad sensor, that is the one that has been working hard and will be worn more than the nearside and consequently will wear out first.
If you travelled any sort of milage I would be checking/changing the pads on that side as you will be given no warning when it's running metal to metal and ruining the brake disc.
 It can when others can't,
It will when others won't,
It goes where others don't. 
 
Post #23443454th Aug 2023 2:49 pm
View user's profile Send private message View poster's gallery Reply with quote
brsc2909
 


Member Since: 15 Jan 2020
Location: Dublin
Posts: 24

Ireland 2007 Discovery 3 TDV6 SE Auto Barolo BlackDiscovery 3

brakepads were new from couple weeks ago. Definitely a bit more wear on the driverside one but only around 1mm difference.
  
Post #23444295th Aug 2023 8:13 pm
View user's profile Send private message View poster's gallery Reply with quote
PROFSR G
 


Member Since: 06 Mar 2017
Location: Lost
Posts: 5044

Ukraine 2009 Discovery 3 TDV6 Commercial XS Auto Stornoway GreyDiscovery 3

The drive shaft serving that wheel is the one that was missing!!!
 yµ (idµ - eAµ) ψ=mψ

 
 
Post #23444345th Aug 2023 9:30 pm
View user's profile Send private message View poster's gallery Reply with quote
V8man
 


Member Since: 01 Jan 2021
Location: Dunno i was just following the satnav😳
Posts: 288

Ukraine 2007 Discovery 3 4.4 V8 HSE Auto Cairns BlueDiscovery 3

Surely op can just swap the more worn pads over to the sensor side ??
 1996 Defender -died (now in landrover heaven😇)chassis to ashes , rust to dust !
2004 Defender td5 gone
2012 Evoque gone
2007 D3 V8 HSE 
 
Post #23444646th Aug 2023 11:00 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site