DISCO3.CO.UK - View topic - Warning messages after replacing lower front arms

Advertise on DISCO3.CO.UK

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Log In

DISCO3.CO.UK > Maintenance & Mods (D4)

Warning messages after replacing lower front arms

Page 1 of 1

pitcaig

Member Since: 14 Mar 2008
Location: Falkirk
Posts: 156

2014 Discovery 4 3.0 SDV6 XS Auto Chablis

Warning messages after replacing lower front arms

Hi

I’ve just replaced my lower front arm’s using a kit with new bolts from AF. Everything went well and I didn’t need to cut any bolts

I’ve not had the alignment done yet as that’s booked for Wednesday.
When I took it out to test drive the steering wheel is off about 45 degrees to the left which wasn’t unexpected. But after about 5 minutes of driving I got the following 3 warning messages-

Stability control not available
Emergency brake assist not available
HDC not available system fault

I did jack up the wheels to get the correct hub to wheel arch distance before torquing all the bolts up.
I’ve had a search and seen that the steering angle sensor being out can cause these messages.

So do you think that once the alignment has been done these should clear? Or have I somehow damaged something else while doing the arms?

I don’t think I have done any damage as it all went okay unless I’ve nicked a wire.

With the car running I can raise and lower the car as normal with no errors, it’s only when the car is driving that I get the messages. The messages clear when switching the car off then back on but come back once driving.

I don’t have a code reader so don’t know if any faults are stored.

I’m hoping once the alignment is done this will fix it but if not what should I be looking at?

Thanks for any help

Graeme

8th Jan 2023 4:48 pm

TR8Mat

Member Since: 23 Dec 2020
Location: Cornwall
Posts: 56

2008 Discovery 3 TDV6 SE Auto Tonga Green

Sounds like symptoms of the steering angle sensor needing recalibrating with an IID tool or similar

8th Jan 2023 4:53 pm

rrhool

Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4538

2007 Discovery 3 TDV6 SE Manual Zermatt Silver

All the messages are because the steering angle is so far out. I'm surprised its that far by just changing the arms tbh.
The garage doing the alignment should fix this, but be sure they know what they are doing before they start! You cant just take the steering wheel off and put it back straight! Richard

D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.

Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone

8th Jan 2023 4:53 pm

CDS
Site Sponsor

Member Since: 12 Oct 2009
Location: Cornwall & most of the UK!
Posts: 3358

2008 Discovery 3 TDV6 HSE Auto Tangiers Orange

The alignment needs to be done that’s all. Once it’s done everything should be good.

The suspension ecu doesn’t like it when the alignment is out

Discovery 3/4 & RRS keys cut and programmed at your home or work
Apple CarPlay/ Android Auto retro fit - see it here
BAS Remaps/ EGR Blanking
Software updates/ enabling
Mobile Servicing & Repairs

8th Jan 2023 4:54 pm

pitcaig

Member Since: 14 Mar 2008
Location: Falkirk
Posts: 156

Hi all

Thanks for the quick reply and reassurance that it should be okay after the alignment.

The guy I use for alignment is one of the best around here and been using him for nearly 30 years. He’s done all of my LRs over the years and knows what he’s doing.

He’s not one to take the steering wheel off. Last time I went with my dad’s octavia I had to make sure the fuel tank was at a certain level so the back end was at the correct ride height to do the alignment.

I will post back after I’ve had it done and let you know the outcome.

Cheers
Graeme

8th Jan 2023 5:00 pm

LT

Member Since: 31 Dec 2005
Location: South West
Posts: 23866

2016 Discovery 4 3.0 TDV6 Landmark LE Auto Santorini Black

Get it done ASAP, the excess and uneven tyre wear even over a just few miles (less than 200 from memory) was noticeable on my D3.

2006 D3 HSE (Original & still the best)-GONE
2010 D4 HSE (A bit bling)-GONE
2014 D4 HSE (Almost too bling)-GONE
2015 D4 HSE (A heated what?)-GONE
2016 D4 Landmark (Written Off)-GONE
2016 D4 Landmark (Surely the last!) PD1881 rims-GONE
2017 FFRR SDV8 Autobiography (now semi-retired)

8th Jan 2023 5:39 pm

pitcaig

Member Since: 14 Mar 2008
Location: Falkirk
Posts: 156

It won’t be moving until it goes to get it done on Wednesday. I’m lucky I’ve got a couple of road worthy projects

8th Jan 2023 5:53 pm

pitcaig

Member Since: 14 Mar 2008
Location: Falkirk
Posts: 156

Hi

Just to close this out.

I got the alignment done today which wasn’t far out. It was all in the green before but he still adjusted it and brought it in a bit tighter. He the recalibrated the steering angle sensor to complete the job.

Feeling a lot better than it did.

Thanks again for the replies

Cheers
Graeme

11th Jan 2023 6:10 pm

bensla

Member Since: 02 May 2023
Location: Trowbridge
Posts: 144

2008 Discovery 3 TDV6 HSE Auto Stornoway Grey

Out of interest if it wasn't far out why was the steering wheel so off center?

25th Jun 2023 5:21 am

Page 1 of 1

Jump to:

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Quote Reply

DISCO3.CO.UK is independent and not affiliated to Land Rover.