Member Since: 22 Jan 2023
Location: Essex
Posts: 16
Lower suspension arm movement
How much moment should there be at the suspension bushing? I changed the lower arms 7months ago but when I had a poke about looking at turbo actuators and wheel bearings I thought I would give it all a wiggle as I am hearing a clunk every now and then. how much is this too much movement? When I changed these I was sure to torque up as required and did so at the correct ride height. Thoughts?
I have short video but that won’t upload.
21st May 2023 2:45 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4452
Upload your video to YouTube as private, post a link on the thread. Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
21st May 2023 7:37 pm
Fin-M
Member Since: 22 Jan 2023
Location: Essex
Posts: 16
.
Last edited by Fin-M on 21st May 2023 9:20 pm. Edited 1 time in total
21st May 2023 8:46 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4452
Sorry, didn't mean private as I can't see it, I think I mean 'not listed' or whatever the description isRichard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
21st May 2023 9:02 pm
Fin-M
Member Since: 22 Jan 2023
Location: Essex
Posts: 16
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4452
doesn't look too excessive. Bush looks to be in good condition.Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
22nd May 2023 8:52 am
eightfoot
Member Since: 12 Apr 2015
Location: sunny essex
Posts: 781
looks good to me also
the arm moves front to back more than up/down so the easiest way to check is to put a wheel brace on a nut and see how much the wheel moves back/forth towards the mud flaps
your always going to get movement as the bush is oil filled another clue to being worn is the serrated edge of the bush will hit the inside of the chassis bracket leaving marks in the dirtplease excuse any grammer/punctuation mistakes,i'm thick,thankyou
current vehicles 2005 d3 2013 d4
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum