Member Since: 16 Aug 2012
Location: Cheshire
Posts: 83
Rear Camshaft Seal Leaking - Help!!!
So Boris the 2011 D4 is at a local independent garage for a service and during the course of this they have found that the Rear Camshaft seal is leaking and they are in the process of preparing a quote to replace this.
Am I realistically going to need to sell an organ to do this??
Car has only done 66k and I have opted not to have the belts changed at this service but if they are going to be messing around in that area would it make sense to do these at the same time??
Thanks in advance!!!
29th Oct 2018 5:27 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20787
When doing the belts there is no question, in my mind, that you should also replace the oil pump.
NJSSAm I Gammon or Woke ? - I neither know nor care.
2016 Discovery 4 Landmark
2011 Mercedes Benz SL350 (R230)
1973 MG B GT V8 - 3.9L John Eales engine, 5 speed R380 gearbox, since 1975.
1959 MGA roadster - 1.9L Peter Burgess Engine - 5 speed gearbox
Past LRs - Multiple FFRs, Discos & a Series I - some petrol, some diesel,
none Electric or H2 fuel cell - yet.
There are 10 types of people in this world: Those who understand binary, and those who don’t.
29th Oct 2018 9:31 pm
SteveNorman
Member Since: 14 Oct 2005
Location: Somerset
Posts: 1145
The seal can be changed in situ, but you do need the special tools to do so.
It seems a horrible job, but is perfectly possible with the right equipment.
We have done a few now with no problems.
The injection pump belt has to be removed, so would be changed while doing the seal.
Regards
Steve
29th Oct 2018 10:24 pm
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
NJSS wrote:
When doing the belts there is no question, in my mind, that you should also replace the oil pump.
NJSS
On a D4, why?
30th Oct 2018 8:38 am
2Springers
Member Since: 12 Apr 2012
Location: Surrey
Posts: 109
Had the leaking Cam Seal problem last year. Hit and miss whether your LR dealer will do the job without the body off. There is a tool that allows this but I was told it can break and the nuts are often very tight - seems LR don't always torque as carefully as they might ...
I ended up using an Indy in Sussex who did the job with the body off and the belts changed at the same time. Cost me less than the main Dealer quoted me for just the cam seal !
31st Oct 2018 2:07 pm
sarahhowen01
Member Since: 16 Aug 2012
Location: Cheshire
Posts: 83
Just out of interest what were you charged and how did you know the seals were on the way out initially??
My main issue is the car hasnt leaked oil at all on the drive which surely it would of been apparent?
31st Oct 2018 4:14 pm
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
Sara
What you have to bear in mind is theres oil leaks and theres oil leaks, then theres each different mechanics definition of an oil leak, some will say huh that is just a damp patch and others will try and convice you its niagaria falls.
Quick simple check, car suspension if off road height, decent torch and (do not get under the car no matter how tempting) shine it on the engine and gearbox undertrays any damp patches means yes there is an oil sweat/damp patch/leak, but again its doesnt tell you how bad it is, if its bad at all.
A little oil can go a long way and look very scary to the unwary.
31st Oct 2018 4:42 pm
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
lynalldiscovery wrote:
NJSS wrote:
When doing the belts there is no question, in my mind, that you should also replace the oil pump.
NJSS
On a D4, why?
I take it oil pump casings are good on the D4? If so is that the case for all D4's?
31st Oct 2018 9:03 pm
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
Oil pumps in all vehciles will outlast the engine, its only because the casting was weak on the D3 that people say replace it.
I work on trucks and in 35 years have never replaced an oil pump, issues with the associated hardware but never with the pump itself.
Have you or anyone else heard of issues with D4 pumps?
31st Oct 2018 9:57 pm
2Springers
Member Since: 12 Apr 2012
Location: Surrey
Posts: 109
Sarah sorry for the slow reply.
The diagnosis was done when the dealer got it up in the air and could see where the oil was coming from. The comment about a little oil going a long way is spot on - I lost very little. First signs were drops on the lower arms down onto the driveway. Geoff. initially thought it could be coming from the transfer box.
The 110k service, belts and cam seal (body off) at an Indy was £1,300 including VAT. They should have quoted £1,700 but made a quote error. Based on the £1,700 figure the cam seal repair would have been c £400.
Having spoken to a lot of dealers in the South East, only one Dealer was willing to use the LR tool to do the seal with the body on and even then cautioned that they had cases of the tool breaking on them due to the bolt being over torqued. Then it would be a body off job...
The Main Dealer quotes for the cam seal fix only ranged from £730 plus VAT (body on) to £2,500 Plus VAT (body off, with 13 hours labour).
Intriguingly my local Main Dealer also quoted £1,700 for a NS cam cover which was "leaking oil" as well. The master Tech struggled to show me any when I asked to inspect the problem and the Indy who did my cam seal confirmed that they could not see any problem with the cam cover problem at all !
Re the oil pump I was told that it was a D3 problem as Lynall says and mine was not replaced when the belts were done.
And finally Lynall's advice re the amount of oil you are losing is really important. Two Indy garages that specialised in LR told me I could leave my seal problem for 6 months until the belts were due a change as I was not losing much oil. A trusted garage should be able to advise you how urgent your repair is. Obviously I checked the oil levels more regularly during that period to make sure I was not low on oil.
31st Oct 2018 11:59 pm
Shaimran
Member Since: 22 Mar 2023
Location: Blackburn
Posts: 15
SteveNorman wrote:
The seal can be changed in situ, but you do need the special tools to do so.
It seems a horrible job, but is perfectly possible with the right equipment.
We have done a few now with no problems.
The injection pump belt has to be removed, so would be changed while doing the seal.
Regards
Steve
Hi maté where you based? Need my rear cam seal changing as slight leak and burning oil.
What are charges and how long would you need car?
Thanks
3rd May 2023 10:50 pm
Moo D3 Decade
Member Since: 13 Aug 2010
Location: Wiltshire
Posts: 14172
He's based in Somerset.New Defender L663 110 SE (known as Noddy!)
Sold Volvo XC90 R-Design (known as Basil)
Sold - D4 HSE (Known as Gerty)
No longer the Old Buses original owner
231,000 miles and counting
05 S manual owned from March 2005
D4 Face lifted
Still original injectors and turbo
V8 Front brakes
BAS Remap, Allisport Intercooler and deCat
EGRs blanked
T-Max split charge
Hanibal Expeedition rack
Prospeed ladder
Duratrac tyres
IID BT
BAS FBH control
3rd May 2023 11:45 pm
Shaimran
Member Since: 22 Mar 2023
Location: Blackburn
Posts: 15
What would cost be for rear cam seal change and the belt and how long. Im from Lancashire so if its like a day job, could have a day out with family and get job done
4th May 2023 12:13 am
SteveNorman
Member Since: 14 Oct 2005
Location: Somerset
Posts: 1145
Sorry, but we have been so busy looking after existing customers that we haven't taken on any new ones for nearly 2 years now.
Difficult decision to stay the size we are, to keep the personal touch & level of service, when there is so much good work out there.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum