Cheeko
Member Since: 04 Jul 2024
Location: Leeds
Posts: 231
  
|
| Gear box fault help if you can please |
|
Zf6speed auto done 2 oil changes then reset gearbox ecu using gap was fine before now it’s got an awful sudder in 1st don’t think it’s torque converter it seem more like the mechatronic unit says on gap that it can behave erraticly while it learns but seems worse than that to me it’s been out for a few drives and it feels like gearbox is trying to shake its self out it fine when you give it some in all the other gears it just seems like it doesn’t like the load of setting off any ideas or have I cleaned the oil too much I also did sump and swooped it for a new filter etc and changed the sleeve other than this I’ve done the centre bearing but split the shaft I marked it all and put it back line to line cheers in advance
|
 5th Sep 2024 3:32 pm |
|
|
