Member Since: 11 Oct 2022
Location: North Yorks
Posts: 39
Dunlop compressor…need programming ?
So I started refurbing my original Hitachi unit and decided it’s beyond repair due to the number of siezed and snapping bolts etc. looking at replacing with a Dunlop unit, some sites reckon I need to reprogram to fit one ? Anyone fitted a Dunlop and had to reprogram as I understood they were a straight swap. I know the much pricier AMK needs it
19th Mar 2023 8:50 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14136
Hi
I swapped my hitachi with a Dunlop and all I done was swap the relay over that came with the new Dunlop , didn’t have to update the software
However would be extremely beneficial to have ur own diagnostics as I can’t remember when the D4’s had the AMK compressors as standard , so u could then ensure 100% it has the correct software
U can buy something basic like an Autel AP200 , this link explains it in a lot more detail
Member Since: 11 Oct 2022
Location: North Yorks
Posts: 39
Cheers for that, is the relay in the fuse box by the battery or somewhere else ? Thanks for that link, I’ve got an Icarsoft diagnostic already but as far as I know it just reads and clears faults etc, not sure if it will reprogram stuff etc. it sounds like I should be okay though 👍
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
