Macka
Member Since: 16 Feb 2020
Location: Vancouver
Posts: 2
|
33x12.5R18 Tire on 18Inch Rim |
|
Hey Team,
I'm looking to fit a 33 or 35 x 12.5 inch tyre to my LR3, but am having trouble clearing the top control arm. From what I have read on this forum a 32mm offset or less should be enough, but i'm looking for a little more confirmation before I purchase some alloys.
So far I have tried a couple of combinations but am not having too much luck.
17x7.5 +40 Rim 35x12.5R17 BFG Mud Terrain Tyre - Hits upper control arm on side lugs
20x10.5 +30 35x12.5R20 Toyo Open Country Tyre - Hits upper control arm on sidewall
Looking at some other size options there are;
18x8 +30
18x8.5 +25
Will one of these rim provide the required offset vs width combination to allow a 12.5 inch tyre to fit and clear the top control arm?
Would one be a better choice than the other?
I was pretty much set on purchasing the below but am having trouble sourcing them in Canada.
Redbourne MORLAND
1885MRL255120B72 18x8.5 Offset: 25
https://www.redbournewheels.com/land-rover...wheels.php
Cheers in advance
Shane
|
17th Mar 2023 5:31 am |
|
|