Tecdiver.
Member Since: 25 Jul 2021
Location: Liverpool
Posts: 77
![](templates/vbnew/images/spacer.gif)
![2016 Discovery 4 3.0 SDV6 HSE Auto Corris Grey 2016 Discovery 4 3.0 SDV6 HSE Auto Corris Grey](../images/veh/corris_grey.gif)
|
So yesterday my D4 decided to have a little wobble and refused to come out of neutral. I was sat at lights on a busy dual carriageway. Luckily I had my GAP tool and did a quick fault check and clear. All good now. Any ideas what may of caused it, I didn't have time to start reading any fault, just wanted to get moving again. It has done it again this morning taking my wife to work. I had to pull red gearbox release and handbrake release as I didn't have my phone to connect to GAP tool. Some mistakes are to good to only make once.
|
8th Feb 2023 7:39 am |
|
|
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8156
![](templates/vbnew/images/spacer.gif)
![2014 Discovery 4 3.0 SDV6 HSE Lux Auto Corris Grey 2014 Discovery 4 3.0 SDV6 HSE Lux Auto Corris Grey](../images/veh/corris_grey.gif)
|
If you cleared all faults you need to list the new faults here, it could be the brake light switch, simple and cheap to replace for starters It can when others can't,
It will when others won't,
It goes where others don't.
|
8th Feb 2023 9:33 am |
|
|
Tecdiver.
Member Since: 25 Jul 2021
Location: Liverpool
Posts: 77
![](templates/vbnew/images/spacer.gif)
![2016 Discovery 4 3.0 SDV6 HSE Auto Corris Grey 2016 Discovery 4 3.0 SDV6 HSE Auto Corris Grey](../images/veh/corris_grey.gif)
|
I have just connected my GAP tool and driven round for 30 mins trying to replicate the fault without success. I did however notice that if I press the brake and release it I can now here an audible click coming from the selector module. Every press creates a click. Sound like a solenoid inside. Other than that I will just keep driving till the fault appears again. Some mistakes are to good to only make once.
|
8th Feb 2023 10:56 am |
|
|