Member Since: 16 Oct 2009
Location: Chandlers Ford
Posts: 2444
Disco 3 Stickers
Bought the Reflective Disco3.co.uk.
Came in the post yesterday
Dumb question but looks like you peel off one side, stick it on the just pull the backing off and hope the letters stick?
My son reckons there is a special tool needed to rub on to each letter to make it stick otherwise it will just be a mess. He is an Art Student and use to Letra Set - enuf said.
4th Dec 2009 2:53 pm
NeilD
Member Since: 01 Dec 2008
Location: Sunny Surrey
Posts: 4845
Glosboy,
If its an external sticker just make sure the window is clean. Peal off the 'back' and place on the window. Just rub it with your hand / cloth and slowly peal back the 'front' wrapper
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15257
Re: Disco 3 Stickers
GlosBoy wrote:
My son reckons there is a special tool needed to rub on to each letter to make it stick.
Yep, the boy's right
You need a 2lb mallet and a 6" block of wood [type unimportant].
When sticker is applied, cover over with block of wood, give three sharp blows with mallet.
Hey presto the sticker will stick to all these little pieces of glass.
btw, only kidding
pressure with your hand will do....... always on the road less travelled 🚧
4th Dec 2009 3:01 pm
GlosBoy
Member Since: 16 Oct 2009
Location: Chandlers Ford
Posts: 2444
NeilD
Thanks.
Yep, its for the outside as have Tints - will try it if dry at the weekend.
On the Farnborough thing - been driving up here from Glos most days for 15 years but the traffic still gets to me, especially when those cyclists get in my way
4th Dec 2009 3:02 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18510
As you've got a reflective it's for external application. You don't need a special tool for vinyl letters, as long as you take your time you won't get bubbles.
Thoroughly clean the surface you want to stick it to (usually the rear window glass).
Carefully remove the yellow/white waxy paper from the "sticky" side of the letters by peeling away the waxy paper at a fairly sharp angle from one end:
Click image to enlarge
With this done you should have something like this, but with the I my demo one is missing :
Click image to enlarge
Line up the D and the K (or M for DISCO4.COM) with the edges and top/bottom - get it level/in the middle of where you want it:
Click image to enlarge
Carefully rub down each letter into place with your fingers - if you're delicate use a small cloth or towel Working along each letter (as you'd write them) will ensure any bubbles are "chased" from under the letters - but the letters are small enough that bubbles aren't normally a problem. Take care around both ends and with the K, the S, the dots and the 3 (or 4) to make sure that they are all stuck down properly:
Click image to enlarge
Click image to enlarge
Once you've rubbed each letter down, give the whole sticker a second firm rub (a cloth is good here) to make sure everything's stuck in place:
Click image to enlarge
Then, working from one end, peel back the translucent "tack" paper steadily at a sharp angle. Watch out for anything that hasn't stuck down (particularly the dots, K, S and 3/4 as above):
Click image to enlarge
Finally - admire your handywork Don't admire my wonky one though (it was windy just now is my excuse):
Click image to enlarge
If you need any more help, do shout 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
Last edited by Martin on 4th Dec 2009 3:36 pm. Edited 1 time in total
4th Dec 2009 3:28 pm
GlosBoy
Member Since: 16 Oct 2009
Location: Chandlers Ford
Posts: 2444
Thanks to all , especially Martin for the photo's
Was expecting some stick for asking dumb question
4th Dec 2009 3:36 pm
ronp
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15257
Very comprehensive guide their Martin but think my mallet and wood application is much simpler
BTW who's that hooligan in the reflection ???...... always on the road less travelled 🚧
4th Dec 2009 3:42 pm
Jads777
Member Since: 03 Sep 2005
Location: Channel Islands
Posts: 697
And if you have kids don't let them rearrange the letters to spell 'COCK' like mine did once!
4th Dec 2009 4:40 pm
Archeci
Member Since: 17 Jul 2009
Location: East Yorkshire
Posts: 558
Hello
Here is a photo of our D3 and the silver sticker on the spare wheel cover.
Lee
Click image to enlarge
Tonga Green TDV6 S
Remember laughing or smiling confuses the management.
Last edited by Archeci on 4th Dec 2009 9:03 pm. Edited 1 time in total
4th Dec 2009 8:56 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50971
Of course ...for the record ...white reflectives are only legal on the front of your motor 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
4th Dec 2009 9:01 pm
GlosBoy
Member Since: 16 Oct 2009
Location: Chandlers Ford
Posts: 2444
fitted at the weekend between showers. wish i had seen lee's picture first as looks neat on the wheel cover. went for the lower part of the rear window.
still looks cool tho
7th Dec 2009 5:09 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72954
Is that a D3 sticker on a vehicle from the Dark Side, shouldn't it be a WWW.RRSNORT.CO.UK sticker??? Unless it was a freebie2, then the D3 sticker should be precedeed by "when I grow up I want to join:"
7th Dec 2009 5:46 pm
Shrinky
Member Since: 05 Jul 2007
Location: Cotswolds
Posts: 2515
Any chance of getting a red one like DG has 8)Global Warming.... I'm luvvin it
7th Dec 2009 5:49 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72954
I hope you mean sticker???
7th Dec 2009 5:52 pm
Shrinky
Member Since: 05 Jul 2007
Location: Cotswolds
Posts: 2515
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum