Member Since: 26 Sep 2006
Location: ASTURIAS
Posts: 2411
HELP !! doubt about installing lower front suspension arms!!
Hello everyone, I find myself in the need to replace, and it would be the second time, these suspension arms. I see from the opinions of some illustrious that the definitive solution is to put the after market model that dispenses with the lubricated silentblocks and opts for the Meyle HD. It is what I now intend, and here comes my doubt and question, The manufacturer warns that the tightening must be done "under load" and I do not know very well what that means and if it has and specifies a certain procedure to apply. I clarify that my knowledge of the matter is zero, but, with your help, I want to protect the installer. Thanks in advance and good week to all of you!lost in translation!
DISCOVERY 3 SE man. TDV6 2006, my true love!
DEFENDER 2 SE D I6 MHEV 2024, other live.
9th May 2022 12:59 pm
ruben D3 Decade
Member Since: 26 Sep 2006
Location: ASTURIAS
Posts: 2411
Do I understand correctly if I say that they are simply mounted and their screws are approximated and tightened once the car is out of the elevator past on the ground? If so, is there a specified tightening torque?lost in translation!
DISCOVERY 3 SE man. TDV6 2006, my true love!
DEFENDER 2 SE D I6 MHEV 2024, other live.
9th May 2022 1:13 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4470
Yes, it simply means the car must be on 4 wheels, at standard height, when the bolts are finally tightened.Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
And, I think, Tight Tolerance Mode should be enabled using iiD or similar, but I also recall some of the more experienced on here don't think it necessary.
Don't just drop the car then tighten, shuffle it around a bit to let suspension settle first..
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
9th May 2022 1:27 pm
sisu
Member Since: 24 Aug 2021
Location: Freiburg
Posts: 15
Hi! Your mechanic or anyone else who installs the control arm must tighten the bolts of the bushings and the strut to ride height. This is to prevent the bushing is twisted too much once the normal condition is reached. The ride height is 466mm from the center of the drive shaft to the bottom of the fender.
The easiest way to tighten is to deflate the shock and then use a jack to push Knuckel up (to 466mm).
Meyle have a very good reputation and probably last forever!
9th May 2022 1:47 pm
ruben D3 Decade
Member Since: 26 Sep 2006
Location: ASTURIAS
Posts: 2411
Thanks guys! I knew you were not going to let me down!!👍🏼👍🏼
… and…by last….Is there something interesting to know about the tightening torque?lost in translation!
DISCOVERY 3 SE man. TDV6 2006, my true love!
DEFENDER 2 SE D I6 MHEV 2024, other live.
9th May 2022 3:32 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10576
Yeah. It’s very tight
9th May 2022 3:51 pm
sisu
Member Since: 24 Aug 2021
Location: Freiburg
Posts: 15
Yes! You need a 24mm socket in long version. Otherwise, you can’t reach the nut.
The bolts for mounting the arm to the frame should be torqued with 275 nm. The Strut to the arm 300 nm. You need a proper torque wrench
9th May 2022 3:53 pm
ruben D3 Decade
Member Since: 26 Sep 2006
Location: ASTURIAS
Posts: 2411
👏👏👍🏼👍🏼👍🏼lost in translation!
DISCOVERY 3 SE man. TDV6 2006, my true love!
DEFENDER 2 SE D I6 MHEV 2024, other live.
9th May 2022 5:54 pm
Rotara
Member Since: 02 Mar 2021
Location: UK
Posts: 59
Can anyone offer comment on the Meyle HD front lower arms? How was the ride? How does this compare to the standard hydro bushes in the Land Rover stock arms? I’m not prepared to compromise ride quality (the real benefit of the Disco 3/4) over longevity of the bush. I’m told by someone else the Meyle HD solid bushes are for the armoured vehicle (hence why it will last longer), but would like your thoughts on comfort/ harshness of the ride etc. thanks.
5th Feb 2023 4:26 pm
nigethecat
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4208
Had Meyle HD arms on several cars (annd not just LR) and (as far as I can tell) the ride isn’t affected. There is another version that is for armoured vehicles but the standard Meyle HD are absolutely fine… get a price from Advanced Factors and take away the forum discount for a good deal I want to see the sweets before I get into your windowless van... I'm not stupid!
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
5th Feb 2023 4:50 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20790
We've fitted hundreds of sets, and not 1 person has commenter on ride quality difference afterwards My D3 Build Thread
Member Since: 26 Sep 2006
Location: ASTURIAS
Posts: 2411
I absolutely agree, nothing changes in terms of the dynamics and comfort of the car, and the feeling of tranquility due to its longevity improves a lot!!lost in translation!
DISCOVERY 3 SE man. TDV6 2006, my true love!
DEFENDER 2 SE D I6 MHEV 2024, other live.
5th Feb 2023 5:02 pm
Rotara
Member Since: 02 Mar 2021
Location: UK
Posts: 59
Thank you for your replies. There’s currently some deals on eBay for a set (both sides) for £250. But these won’t come supplied with the fitting hardware. I’ve read that it is best going LR original hardware for reliability and longevity reasons. But LR is so expensive- for a few nuts & bolts ! Thanks again
5th Feb 2023 5:22 pm
nigethecat
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4208
Buy the full set from AF and it comes with bolts etc included… the ride quality does differ from before and after… it improves I want to see the sweets before I get into your windowless van... I'm not stupid!
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum