allagras
Member Since: 29 Oct 2021
Location: Wanneroo
Posts: 3
  
|
Hi All
I'm trying to update my IIDTool G3's firmware but I'm having problems.
I have downloaded the Updater software and it runs OK, and my IIDTool works fine when plugged into the car OBDII port, but my Windows (Windows 11) laptop refuses to 'see' the IID!
Plugging into USB port does absolutely nothing - have tried different USB ports, different USB leads and even a different computer (although still running Windows 11)
Has anyone else had issues with updating firmware recently?
Thanks
Grant
|
 15th Nov 2022 1:52 pm |
|
|
flydive
Member Since: 21 Aug 2007
Location: Lugano
Posts: 1536
|
Did you use the IIDTool original USB lead?
|
| 15th Nov 2022 2:16 pm |
|
|
|
|
allagras
Member Since: 29 Oct 2021
Location: Wanneroo
Posts: 3
|
Thanks guys
In response to fly dive…I don’t think so. I have about a million micro usb leads lying around. I was half suspecting that there might be a chip or similar embedded in the leaf to support serial comms
|
| 15th Nov 2022 2:33 pm |
|
|
flydive
Member Since: 21 Aug 2007
Location: Lugano
Posts: 1536
|
I had that with mine, if using another wire the pc would not see the tool.
|
| 15th Nov 2022 3:23 pm |
|
|
Sidestick
Member Since: 22 Apr 2012
Location: Rome
Posts: 2327
 
|
Fly ha scaricato l'app "Gap Updater"? - Easy-Lift suspension module 4.0
- GoodWinch 9500 lb
- Full underbody protections
- Tree/Rock sidebars
- Prospeed roofrack & ladder
- Compressor guard
- Raised Air Intake
- Driving lights (2+4)
- 50 mm Waffle boards
- Altox Heater control
- Overland Rooftop Tent
- Rear seats entertainment
- Front & Rear camera
- GVIF
- Removable tow bar
- Cubby box fridge
- BFG KO2 265/65R17
- iidTool BT
|
| 15th Nov 2022 6:20 pm |
|
|
flydive
Member Since: 21 Aug 2007
Location: Lugano
Posts: 1536
|
Ciao Sidestick.
Se chiedi se io ho scaricato l'app " IIDTool updater 2", sì, già da molto tempo e funziona.
Ma mi è capitato che usando un'altro cavo, non l'originale, il pc non vedeva l'apparecchio, usando il cavo originale, nessun problema
|
| 15th Nov 2022 6:29 pm |
|
|
Kevin
Member Since: 23 Feb 2005
Location: Poole or Somewhere at Sea
Posts: 106
|
allagras wrote:Thanks guys
In response to fly dive…I don’t think so. I have about a million micro usb leads lying around. I was half suspecting that there might be a chip or similar embedded in the leaf to support serial comms
There is no chip but a lead with all pins connected is needed. I use various leads to update. It’s probably a driver issue. Kevin
BAS TUNE
Faultmate MSV-2 MULTI VEHICLE
|
| 10th Jan 2023 5:06 pm |
|
|
