Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Webasto Fuel Burning Heater

Fbh not on diag all of a sudden
Post Reply  Down to end
Page 1 of 1
Doughboy
 


Member Since: 04 Aug 2020
Location: Tamworth
Posts: 92

United Kingdom 2005 Discovery 3 TDV6 Base 7 Seat Manual Baltic BlueDiscovery 3
Fbh not on diag all of a sudden

Hi all,
As in title, I have got an autel and occasionaly scan to see if any faults pop up. Very recently my fbh won't come on. I have been activating it using the remote fitted and my 3rd button on cold mornings.
When went to check if there were any faults showing why it isnt working, its not showing auxiliary heater in the list anymore.
I have seen it previously and cleared faults or run a priming routine.
Any ideas why I can't see it now on my diag.
The fuse looks OK.
Cheers
Rich
  
Post #232311417th Jan 2023 6:08 pm
View user's profile Send private message View poster's gallery Reply with quote
Flatlander
 


Member Since: 20 Jul 2015
Location: Here
Posts: 575

United Kingdom 

It might have just been 'spiked' due to low voltage during cranking, either pull the fuse or the power connector for a few seconds, whilst you're at it, check the voltage supply at the connector and the fuse is intact. I've seen a few refuse to start due to volt drop across the fuse or harness but they still communicated.
  
Post #232311717th Jan 2023 6:22 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10663

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

I guess make sure the climate control panel is ON when using the Diag tool
  
Post #232311917th Jan 2023 6:26 pm
View user's profile Send private message View poster's gallery Reply with quote
Motolab
 


Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820

Netherlands 2006 Discovery 3 TDV6 HSE Auto Zambezi SilverDiscovery 3
Re: Fbh not on diag all of a sudden

Sorry i can not resist it if i read this

Doughboy wrote:
or run a priming routine.


NEVER “run” a priming routine!

It is a diesel! Not gasoline..

Priming is ONLY to use IF you fit a new dosingpump or a new fuel line, otherwise never, even not when only the heater unit is exchanged …

As a matter of fact, a lot of FBH’s will stop working after such unnecessary fuel prime sessions, since the glowplug gets „glazed“ (is that correct english?) Or soothe up, when they do, the resistance changes permanently so the glowplug stops working correctly….

Regarding your question, i only see 3 options: fuse, wiring (12v, CAN) a ECU (webasto or LR)
 Best regards
Harold

Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year

Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc. Wink 
 
Post #232313417th Jan 2023 8:36 pm
View user's profile Send private message View poster's gallery Reply with quote
Doughboy
 


Member Since: 04 Aug 2020
Location: Tamworth
Posts: 92

United Kingdom 2005 Discovery 3 TDV6 Base 7 Seat Manual Baltic BlueDiscovery 3

Cheers guys, I will get out with the meter tomorrow when it's light.
Rich
  
Post #232314517th Jan 2023 10:50 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site