Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
disco32009
Member Since: 12 Oct 2009
Location: worcestershire
Posts: 295
|
Hi, would someone please confirm the part number for the antenna please for the fuel burning heater module.
I did order one from rimmer bros but they have just sent me a lead🤦‍♂️, so will be onto them first thing in the morning.
|
20th Nov 2022 4:19 pm |
|
|
Trailered Movements
Member Since: 16 Jan 2020
Location: East/West Sussex Coast Borders
Posts: 1200
|
Funny (not) that, the exact same thing happened to me from Duckworths a couple of years back.
It was so long ago I can't give you the part number, sorry.
Dave 2011 Discovery 4 Commercial SDV6 (Gone)
2010 RRS TDV8 (Gone)
1980 OBLIC 4.0ltr Range Rover (went a long time ago)
|
20th Nov 2022 4:55 pm |
|
|
Flatlander
Member Since: 20 Jul 2015
Location: Here
Posts: 575
|
The antenna is printed onto the OSR side window glass, so the cable (LR030286) is what you need to connect the module to the antenna, and therefore the correct item.
|
20th Nov 2022 6:08 pm |
|
|
disco32009
Member Since: 12 Oct 2009
Location: worcestershire
Posts: 295
|
Sorry flatlander not with you.
I am trying to retro install the FBH module etc, I was under the impression I needed the black long rectangle shaped antenna with the lead and connector which fits into the module, I have seen on here people stick them to the osr side window?
So are you saying I already have an antenna in the osr glass with a connector on already?
|
20th Nov 2022 7:04 pm |
|
|
Flatlander
Member Since: 20 Jul 2015
Location: Here
Posts: 575
|
All the one's I've installed have the antenna connector on the glass with a 9V battery type connector soldered in place, I'll see if I can find a photo / diagram.
|
20th Nov 2022 8:09 pm |
|
|
|
Flatlander
Member Since: 20 Jul 2015
Location: Here
Posts: 575
|
The LR part number for that is LR008654, have a look first to see if you have an unused antenna connector on the OSR side window, I think it is the rearmost one and a single connector, not a twin. If so, the cable you have been supplied with will work and you'll get a better range as the antenna isn't enclosed.
|
20th Nov 2022 8:24 pm |
|
|
disco32009
Member Since: 12 Oct 2009
Location: worcestershire
Posts: 295
|
Ok many thanks for your help, would you advise I remove the osr plastic trim panel? Or will it be obvious to see?
Thanks again for your helpđź‘Ť
|
20th Nov 2022 9:09 pm |
|
|
Flatlander
Member Since: 20 Jul 2015
Location: Here
Posts: 575
|
You should be able to push the headlining up slightly to access, the fixings on the cable will give you an idea as to the position. To fit it correctly, you need to remove / pull away the OS boot side trim and the 'D' pillar trim with the speaker in. It's worth having a trial fit with the cable you have, the last one I fitted was a 12MY so quite a while ago but I can't see any changes in the glass part numbers so it should still be there.
|
20th Nov 2022 9:18 pm |
|
|
disco32009
Member Since: 12 Oct 2009
Location: worcestershire
Posts: 295
|
Ok I will have a fish around and see what I can or can’t find thanks
|
20th Nov 2022 9:26 pm |
|
|
disco32009
Member Since: 12 Oct 2009
Location: worcestershire
Posts: 295
|
Flatlander wrote:You should be able to push the headlining up slightly to access, the fixings on the cable will give you an idea as to the position. To fit it correctly, you need to remove / pull away the OS boot side trim and the 'D' pillar trim with the speaker in. It's worth having a trial fit with the cable you have, the last one I fitted was a 12MY so quite a while ago but I can't see any changes in the glass part numbers so it should still be there.
Mine is a 16 landmark so you of thought it to be there.
|
20th Nov 2022 9:28 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.