Lee1976
Member Since: 22 Sep 2018
Location: Cheltenham
Posts: 6
|
2008 diesel auto with no reverse lights |
|
Hi all, sorry about asking as im sure its been covered but after searching the forum for 3 hours i still can’t find an answer.
So MOT guy informed me that I have no reverse lights! Its and Auto so not sure where the switch is located? Is it on the auto box or the CJB?
Parking sensors work fine.
Wing mirrors dip as expected.
R shows and stays on when Reverse is selected.
Both bulbs look good and did swap out.
Checked F5 and swapped 10A out but no change.
Any help with this is greatly appreciated.
Have plug in diag tool but show no errors that relate to lights.
|
4th Nov 2022 11:54 pm |
|
|
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1784
|
They reverse lights are fed from a fuse in the battery box (16e) to the relay on the CJB. There is a 10 amp fuse 5 (CJB) which you need to take out and check. The other thing to check is whether you have a good earth to the bulbs. Take the bulbs out and apply 12v to them to see if they work. Could be faulty but dosen't show up.
|
5th Nov 2022 6:16 am |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10379
|
Also check to see if you have power on the fuse when in reverse and ignition on.
|
5th Nov 2022 6:33 am |
|
|
Lee1976
Member Since: 22 Sep 2018
Location: Cheltenham
Posts: 6
|
Thanks guys after checking and re-checking pulling fuses bulbs and refitting cable connectors they both sprung into life. Thats for the help guys really appreciate it
|
5th Nov 2022 8:18 pm |
|
|