Member Since: 25 Apr 2019
Location: Cornwall
Posts: 8
Clonk Noise
Hi all,
I was wondering if anyone can help?
When reversing down a steep gradient at low speeds (Fathers drive) there is a clunk noise front the front wheel area, like something falling over itself, not repeatedly, perhaps just the once or twice.
Not sure if it is relevant but the front lower wishbones have been replaced within the last 12 months.
Any ideas/suggestions welcome.
19th Sep 2019 10:59 am
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6415
font wheel area? is it more prominent on elft or right side closer to cabin of further away from it? and all
metalic clonk?
19th Sep 2019 12:02 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4540
Do you have the suspension at normal height or access height when reversing down the drive?Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
19th Sep 2019 1:27 pm
stevey_t
Member Since: 25 Apr 2019
Location: Cornwall
Posts: 8
Thanks for the replies, it is in the raised height when reversing down, and is a metallic type clonk. It certainly feels wheel turning related but only happens on the turn at the bottom of the drive decline.
19th Sep 2019 1:57 pm
Andyyav
Member Since: 22 May 2019
Location: Norfolk
Posts: 305
Bit of a long shot but did you get to the bottom this?
i have something similar after the lower arms and lower steering column were replaced, i've greased the stops but it only happens when reversing at about half lock steering turned to the left if that makes sense
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
