jimbo55
Member Since: 10 May 2022
Location: England
Posts: 38
|
I regularly tow a couple of trailers with the disco (and other vehicles), one has a 7 pin socket and the other a 13pin.
I currently have the two 12N and 12S 7 pin sockets fitted from the factory, but have been toying with the idea of getting rid of the 12S (white 7 pin socket for supplementary electrics) and replacing it with a 13 pin socket wired.
Effectively so I can have both a 13pin and a 12S (7pin) on the vehicle to avoid having to use any adapters on the trailers. I know this would need some wiring to split the feed as both sockets would need some of the same connections for lights.
Has anyone done anything similar before? Or is there any reason why this can’t be done?
|
 17th Jun 2022 4:32 pm |
|
|
popsdosh
Member Since: 09 Nov 2009
Location: cambs
Posts: 442
  
|
Why? Keep it simple the adaptors are simple enough to use or just put 13 pin on other trailer
|
| 18th Jun 2022 8:00 am |
|
|
nigethecat
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4252
|
If it were me, I’d fit a 13pin to the car (lots more options) and then just rewire the trailer lead to a 13 pin connector. Most stuff made after 2013 uses 13 pin so that’s the way to go  I want to see the sweets before I get into your windowless van... I'm not stupid!
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
|
| 18th Jun 2022 8:57 am |
|
|
