Samj89
Member Since: 24 Jan 2022
Location: Broadstairs
Posts: 32
  
|
| Front crank shaft seal tool |
|
Hi im looking to purchase or hire a front cranknshaft seal tool ( the one that pushes the seal into the correct position into the oil pump) could anyone recommend where i can get this from. I have a new fomoco pump to fit
Cheers
|
 16th Jun 2022 10:26 pm |
|
|
loanrangie
Member Since: 18 Jun 2017
Location: Melbourne
Posts: 606
|
I just used the plastic locator that was on the pump holding the gears in place.
|
| 17th Jun 2022 6:56 am |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10374
 
|
Some people use the tool that comes with the victor reinz seal. And bin the seal
|
| 17th Jun 2022 8:41 am |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6236
|
Samj89 is referring to the tool that makes sure the seal is knocked in 1mm below the surface of the oil pump .
Flack 
|
| 17th Jun 2022 3:12 pm |
|
|
Samj89
Member Since: 24 Jan 2022
Location: Broadstairs
Posts: 32
|
Cheers for your replies I may use the plastic bit from the oil pump and get a 1mm shim the same size as the crank seal and push it into place like that not sure though if the plasttic bit is bigger that the crank seal
|
| 17th Jun 2022 4:41 pm |
|
|
Samj89
Member Since: 24 Jan 2022
Location: Broadstairs
Posts: 32
|
Cheers for your replies I may use the plastic bit from the oil pump and get a 1mm shim the same size as the crank seal and push it into place like that not sure though if the plasttic bit is bigger that the crank seal
|
| 17th Jun 2022 4:46 pm |
|
|
