s60r
Member Since: 14 Mar 2021
Location: West Sussex
Posts: 287
  
|
Hi all,
I am removing my commercial bench seat and adding 3 individual folding seats.
I have stripped everything out and i'm obviously struggling with the tamper proof bolts that block the access to the bolt holes required. I have seen the thread on this and I'm working through the ideas of how to remove them. They are properly in there though!! I have broken all my slotted screwdrivers trying to get them to turn once I cut a slot in the bolt with a grinder....anyway I'll keep trying with those...
The problem I have is the middle row outer seats tilt forward and have a bar fitting on the floor that the seats latch to when in position. I believe the bar is one piece and goes the whole width of the car? I cannot find that part listed anywhere and its all I need to get the seats fitted.
Doers anyone have a clue what the part is called or where to even start looking for one? I have searched on here and can't find any info! Being a commercial it never had seat fittings and all the breakers seem to have the seats but no floor anchor points.
Any help appreciated as I can't find anything on it.
 A mod a week until I have nothing to improve or add.
|
 5th Jun 2022 2:31 pm |
|
|
s60r
Member Since: 14 Mar 2021
Location: West Sussex
Posts: 287
|
Just to complete my own thread!
The part number is HTQ500011
It is a one piece metal plate bolted to the floor that houses the loops that the middle row lock down to.
A mod a week until I have nothing to improve or add.
|
| 5th Jun 2022 6:49 pm |
|
|
