I have had a genuine BT IID Tool for a few years now, and it has proven very useful to read fault codes, clear codes etc. However, that's about all I have ever done with it and I'm sure there must be more to it.
Mine is a 2008 D3 TDV6 by the way.
So, what else could I be doing with it that will improve my life with the car?1998 Defender 110 TUM HS FFR Hard Top XD WOLF
2016 Discovery 4 HSE
1982 Series 3 2.25 Petrol Hard top- Oscar, as featured in Classic Land Rover Magazine for 7 months
16th Dec 2020 8:48 am
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73134
If there’s a particular thing that’s of concern you can set up a screen to monitor these figures. I used to have this up on my phone, gave me hours of entertainment on a long haul. You can never be too paranoid!
Click image to enlarge
16th Dec 2020 8:58 am
RogB
Member Since: 15 Jun 2018
Location: Mansfield
Posts: 1738
IID was used on mine to code the Xenons and DRL (but your HSE will have those anyway) timed climate (you've got it) add the lock/unlock chirp
there weren't many more features, if any that could be added to my XS spec as I have factory 4x4 info and rear camera but you could add these if you don't already have it.
ive seen of people on here resetting ride height sensors, new battery installations, live readings of components such as turbo boost, EGR, MAF etc etc.2011 D4 XS 305 MY12 - gone but not forgotten
16th Dec 2020 9:00 am
Kenny57
Member Since: 12 Apr 2020
Location: Essex
Posts: 173
I suppose that depends on how much you want to work on your car or play around with its specification.
For example I only got mine a few weeks ago and so far I've tested my Webasto heater works ok, I've recalibrated my suspension after fitting a new height sensor and putting bigger wheels on, and I've deflated my suspension to cure a leaky joint.
16th Dec 2020 9:00 am
RRUK Site Supporter
Member Since: 16 Aug 2005
Location: UK
Posts: 681
RogB wrote:
IID was used on mine to code the Xenons and DRL (but your HSE will have those anyway) timed climate (you've got it) add the lock/unlock chirp
there weren't many more features, if any that could be added to my XS spec as I have factory 4x4 info and rear camera but you could add these if you don't already have it.
ive seen of people on here resetting ride height sensors, new battery installations, live readings of components such as turbo boost, EGR, MAF etc etc.
I don't have DRL's and cannot be bothered, - I just put my lights on!
I have the FBH but not timed climate (screen based or key fob) - i this something I can enable?
I also don't have rear camera (think this arrived on the 2010 D4 only
All those live readings are great - but only add value if you know what the readings are supposed to be!1998 Defender 110 TUM HS FFR Hard Top XD WOLF
2016 Discovery 4 HSE
1982 Series 3 2.25 Petrol Hard top- Oscar, as featured in Classic Land Rover Magazine for 7 months
16th Dec 2020 9:56 am
RogB
Member Since: 15 Jun 2018
Location: Mansfield
Posts: 1738
the main reason I got the Xenon DRL combo was an upgrade from the rubbish 2011 Halogen to a bargain set of 2015 lights off an HSE spec D4, I made more back selling the old lights on Ebay
Yes I think you could add timed climate to yours but someone with more knowledge of the D3 screens etc would be better placed to advise.
Couldn't agree more with what you say about knowing what your looking at on the IID, ive not bothered getting one as there are a couple of trusted indys round here I can use for fault codes etc2011 D4 XS 305 MY12 - gone but not forgotten
16th Dec 2020 10:15 am
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8244
The best thing you can do with it is check you have the latest firmware installed on lt It can when others can't,
It will when others won't,
It goes where others don't.
16th Dec 2020 1:03 pm
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
Used it to update the bluetooth software to save inputting the 1212's every time I used the motor and also have the phone book displayed now
16th Dec 2020 1:15 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4540
To let the air out of the suspension airbags, before changing all the arms, and loading the egr patch Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
16th Dec 2020 1:39 pm
motorworks
Member Since: 14 Nov 2019
Location: Usk
Posts: 412
Is IID tool able to report gearbox adaptations?Chris
16th Dec 2020 2:43 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8244
The adaptions can be reset!
You can update the firmware of your gearbox with the latest available through Gaps fast track service for £25, I did my D3 with good results It can when others can't,
It will when others won't,
It goes where others don't.
Member Since: 15 Jan 2016
Location: GL
Posts: 10740
you can program new keys, and calibrate the suspension.
update ecu software.
remap the engine, (though you have to pay for the map file)
16th Dec 2020 4:51 pm
jjvd21
Member Since: 16 Jul 2007
Location: Chicago
Posts: 1070
Well I guess I’ll be buying a Gap IID tool then! If you own multiple LR’s is it possible to buy a license to use on them or is the unit locked to one VIN?16 D4 Landmark
05 D3 HSE V8
THE original D4 spotter
16th Dec 2020 5:20 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8244
It is locked to one vin but extra vins can be purchased or you can buy the unlocked version which costs considerably more, but the single vin version is capable of doing at lot to other LR vehicles in the same range, read codes, live values but cannot update ECU’s.It can when others can't,
It will when others won't,
It goes where others don't.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
