| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
jdpitts
Member Since: 09 Sep 2022
Location: UK
Posts: 15
 
|
| 2012 D4 steering wheel audio controls not working |
|
Has anybody had this problem before and know how to fix it? Right side button works OK, left one does not all of a sudden. Saw somwhere that WD40 contact cleaner might fix the problem??
Last edited by jdpitts on 22nd Jun 2023 11:32 am. Edited 1 time in total
|
 19th Jun 2023 2:48 pm |
|
|
jdpitts
Member Since: 09 Sep 2022
Location: UK
Posts: 15
|
Anyone?
|
| 21st Jun 2023 8:22 pm |
|
|
jdpitts
Member Since: 09 Sep 2022
Location: UK
Posts: 15
|
WD40 contact cleaner did not fix it 
|
| 21st Jun 2023 8:23 pm |
|
|
Naki Blake
Member Since: 31 Dec 2021
Location: Taranaki
Posts: 312
  
|
Has the button gone floppy? I had a couple on the CD player go floppy, No longer work. I believe it is caused by a plastic pin on the back of the button that breaks.
I have seen them on EBay, but never the one I need.
Someone else may know where to source them.
Blake
|
| 21st Jun 2023 8:55 pm |
|
|
jdpitts
Member Since: 09 Sep 2022
Location: UK
Posts: 15
|
No, it's not gone floppy, just not working. Only just bought the car, was working for 4 days, not working now.
|
| 21st Jun 2023 9:51 pm |
|
|
Nasher
Member Since: 07 Mar 2009
Location: Clanfield, North of Pompey - UK
Posts: 2815
 
|
Assuming the D4 is the same as the D3 the steering wheel buttons are not a simple 'push to make' style.
They work off a resistive network, which in simple terms means that each press of the buttons causes a different resistance in the circuit which the head unit monitors and decides what needs to be done if there is a change.
So any small issue causing a change to the resistance in the circuit confuses the head unit.
Perhaps something has been spilt on the wheel before you brought the car and it's dried.
Possibly even 'over enthusiastic' use of cleaning chemicals.
Have you had the airbag out to check the connector from the sub-loom to the clock spring?
I think, although am not sure, that the left and right hand button circuit travels through the clock spring independently, so it could be a clock spring issue. Heaven doesn't want me, and hell is afraid I'll take over.
|
| 22nd Jun 2023 7:27 am |
|
|
jdpitts
Member Since: 09 Sep 2022
Location: UK
Posts: 15
|
I had thought about taking the airbag off and having a look at the connections/clock spring, might just go back to the dealer first and get him to fix it 🤣 If I don't get any joy I'm going to have to dig in it seems!
|
| 22nd Jun 2023 7:34 am |
|
|
waterbuoy
Member Since: 26 Oct 2013
Location: Argyll
Posts: 2922
 
|
I would suggest you don't tell him you tried fixing it with contact cleaner!  Currently 2009 Disco 3 SE, 2013 MY D4 HSE and 2016 D4 SE
Previously:
TD5 Defender 110 CSW (230k miles)
300TDi Disco 1 (289k)
4 RR Classics (300-350k each, 2 manual, 2 auto)
110 V8 CSW (220k)
S3 109 hi cap pickup (ex RN)
S2A 88 Safari SW with lpg conversion (bloody lethal)
|
| 22nd Jun 2023 9:08 am |
|
|
jdpitts
Member Since: 09 Sep 2022
Location: UK
Posts: 15
|
so, I replaced the clock spring, cleaned both button modules, put it all back together and hey presto!… All buttons now working. That’s the good news. Bad news is the air bag light is now on 🙄 Is this common, is it just a case of getting the fault reset?
|
| 16th Jul 2023 9:45 pm |
|
|
jimska
Member Since: 06 Sep 2010
Location: Ticehurst
Posts: 12
|
UPDATE - should have updated sooner...Chinese clock spring knock off was the problem, got one from salvage, all good now.
|
| 29th Nov 2023 12:38 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.
