LandRobert
Member Since: 15 Jan 2021
Location: Almere
Posts: 66
  
|
| Lower Tail switch not opening tail gate |
|
Dear all,
I have a lower tail gate issue. It will not open with the switch. The switch seems to be ok but i still ordered a new one. In the tail gate no obvious wiring damage. There is no voltage on the plugs of the actuators on the two sides. Is there a circuit breaker in system that i dont know 
Thanks for your inputs.
Robert 2005 V8 HSE
|
 16th Jan 2022 5:36 pm |
|
|
Leon
Member Since: 26 Apr 2014
Location: Leamington Spa
Posts: 434
 
|
Hi Robert,
Might be worth having a look at my post a few down from this one.
I had a fault with the upper tailgate but it works the same as bottom switch.
Garry kindly put up some wiring diagrams that will be worth looking at.
First thing first, have you got 12v on one of your switch wires(the one that comes from the CJB).
|
| 17th Jan 2022 10:50 pm |
|
|
|
|
LandRobert
Member Since: 15 Jan 2021
Location: Almere
Posts: 66
|
Hi guys,
Replaced the switch today and the tail was working a couple of times and than died again. Any suggestions. 2005 V8 HSE
|
| 29th Jan 2022 8:47 pm |
|
|
Leon
Member Since: 26 Apr 2014
Location: Leamington Spa
Posts: 434
|
Might be worth checking both the cables going to the switch as far down the loom as you can see. Mine had a slight nick in it about 4 inches from the terminals although my fault was on the upper tailgate. Seems odd yours worked a few times.
|
| 30th Jan 2022 10:49 am |
|
|
