Member Since: 12 Feb 2021
Location: Stroud
Posts: 196
ARB Bushes Done
Next Job on the list ticked off. The top bolt on the nearside bush is as bad as everyone warned. In the end this LandRover Special tool with a 1/2" wobble extension did the job to crack the nut then deep offset 18mm ring spanner did the rest.
Taking the oil cooler away from its bracket (one M6 bolt) also made access to the O/S Top bolt less hassle.
Next Job, inlet manifolds remove and clean, HPFP Belt and replace glow plugs.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum