Member Since: 01 Oct 2021
Location: Kulmbach
Posts: 109
cavity preservation body
Hi!
I would like to preserve the body cavities. I know of DInol such "spray plans" on which the holes are marked, through which the preservation can be introduced.
Is there such a thing on for the D4?
Thomas
23rd Dec 2021 8:25 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14177
Hi
Personally didn’t use a spray chart , here’s a guide of what and how much to use on a discovery
Regarding the internals of the chassis and underbody , using a long Lance ensured injecting the dinitrol in every hole that could be seen, allowing it to come out, then simply moved along the chassis and underbody , then removed all plastic wheel arch liners, side trims etc and then sprayed all the panels etc
Not wishing to teach u how to suck eggs, but put down a plastic sheet then drive on top of it, plus having some protective glasses , disposable overalls and gloves ,
Preparation took the longest , jet washing inside / outside of the chassis , underbody , wheel arches , removing any loose paint, then I steam cleaned , left for a few days to totally dry
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
