Member Since: 13 Nov 2020
Location: Stourbridge
Posts: 19
Suspension and brake fault
Hi all I’m in a bit of a mess, problem started with fluid lost du to corrosion on rear brake pipes. This has been fixed and correctly bleed. I now have various lights on no suspension, hand brake not working stuck on , no special functions abs light on and turning lights light on.
10th Dec 2021 7:14 pm
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
Have you read the codes?
10th Dec 2021 7:19 pm
Paul Milton
Member Since: 13 Nov 2020
Location: Stourbridge
Posts: 19
No specific fault codes just uo416 all terrain module and adaptive light module tried clearing but they’re still there?
10th Dec 2021 7:25 pm
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1804
Have you tried a system reset - that is, remove both battery leads and then short them together for around 30 secs. Is your battery in good condition and charged up.
11th Dec 2021 2:38 am
Paul Milton
Member Since: 13 Nov 2020
Location: Stourbridge
Posts: 19
I’ll try that tomorrow thanks
11th Dec 2021 6:23 pm
Paul Milton
Member Since: 13 Nov 2020
Location: Stourbridge
Posts: 19
Tried doing the hard reset no luck. Tried to disengage the handbrake using the emergency release cable again no luck.
Can’t believe just changing a brake pipe has caused all this.
12th Dec 2021 4:59 pm
Paul Milton
Member Since: 13 Nov 2020
Location: Stourbridge
Posts: 19
New battery fitted 2 months ago
12th Dec 2021 5:00 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4939
Paul Milton wrote:
Tried doing the hard reset no luck. Tried to disengage the handbrake using the emergency release cable again no luck.
Can’t believe just changing a brake pipe has caused all this.
You need to pull hard on the release cable, really hard!
Place a good strong rod in the loop end of the release cable and pull hard. Just make sure the transmission is in park or the wheels are chocked. If you straddle yourself between the front seats it's easier to do. Check the battery voltage and charge it if the voltage is below 12.5v.
If that's OK check the earth straps particularly the one from the transfer box to the chassis, but check all of them!!
Lastly, fill out your profile completely as it will help others to help you if they know which model, engine, spec, and year D3 you have. yµ (idµ - eAµ) ψ=mψ
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum