Member Since: 29 Jun 2021
Location: Cardiff
Posts: 185
Pretty sure my WFH isn't working - should I get a warning?
So, I've started the car under 5 degrees with plenty of fuel but no tell tale smoke as far as I could see and the car took an age to heat whilst driving around town so sure it's not working.
Would there normally be an engine mgmt light? I have a D3 MY07 and it gives me lights and bongs for everything else so surprised I didn't get a warning/dash light?
Thanks
Mike
30th Nov 2021 9:50 am
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4536
AS I understand it, very early D3's had a dash light to show the FBH was on, but that was deleted about 2006?
No warnings on a 2007 AFAIKRichard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
30th Nov 2021 11:19 am
Bracechenko
Member Since: 29 Jun 2021
Location: Cardiff
Posts: 185
That'll explain it then thanks
I suppose I'd better get it fixed at some point then. I've heard it's often just easier to get a garage to replace for another one....I don't intend on doing any spannering myself....any thoughts?
30th Nov 2021 11:29 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10719
try removing the FBH fuse for 30 seconds and refit
There is a wiki somewhere at the top
30th Nov 2021 12:05 pm
Kilovolt
Member Since: 29 Jun 2015
Location: South Derbyshire
Posts: 1076
"Track day running - Don't put your foot back on the accelerator until your absolutely sure you don't have to take it off again"
Current Ride: D4 XS Commercial Baltic Blue SDV6 fully loaded with heated everything
Track Days: BMW E36 M3 Evolution MY 1996 (3.2 Litre 377 BHP sat in 1,250 Kgs of car, with a pro safety cage and some serious braking power)
30th Nov 2021 3:59 pm
Bracechenko
Member Since: 29 Jun 2021
Location: Cardiff
Posts: 185
Thanks guys - will try that fuse trick 1st...just need to wait until it's cold again now!
30th Nov 2021 4:08 pm
Mr.Pastry
Member Since: 24 Nov 2010
Location: South Wales
Posts: 484
Hi Mike.
If you do fancy having a look at it yourself, you can have this.....
Click image to enlarge
You just need download the Webasto diagnostic software & connect directly to the fbh.
Plenty of information around (if you have the time & patience).
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum