sisu
Member Since: 24 Aug 2021
Location: Freiburg
Posts: 15
  
|
Hi together,
I've been searching the web and the forum for quite a while now. The seal of one of my injectors is faulty. More precisely, it is the seal of the piezo unit to the shaft (large nut above). There is a new seal on Ebay - already ordered. I wonder, however, if you can unscrew the piezo element so easily and can screw on again without the anything being adjusted.
There is probably a meter that shows you the gap and thus specifies how much torque the nut still needs. Does one of you have experience on this subject?
Cheers
Dan
Translated with www.DeepL.com/Translator (free version)
|
 6th Dec 2021 5:08 pm |
|
|
