Member Since: 01 Oct 2005
Location: England
Posts: 203
Trim removal
Can anyone tell me how to remove the trim between the drivers footwell and the steering wheel? I've had a quick look in the dark tonight and could see no obvious screws / clips. I want to run a cable from the top of the dash by the A pillar and pick up a 12V supply from somewhere around the ignition.
I did try searching the forum but it seems I'm not very good at that in the dark either
20th Mar 2008 9:31 pm
countrywide
Member Since: 16 Sep 2007
Location: UK
Posts: 6019
If your looking for a supply, pull the headlight switch out (it just pulls out) and you can find a permanent 12V supply on there. This is what Land Rover suggest you use for the Webasto timer.
You can reach up there to route the cable from the footwell.
20th Mar 2008 9:34 pm
tucker_j
Member Since: 01 Oct 2005
Location: England
Posts: 203
That's sounds easy, thanks. I'll take a look tomorrow. Is there an ignition live to that switch too?
20th Mar 2008 9:38 pm
countrywide
Member Since: 16 Sep 2007
Location: UK
Posts: 6019
I believe so, but not sure of the colours, you will need to use a multi meter.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum