09PMG
Member Since: 23 Oct 2021
Location: Leicester
Posts: 4
  
|
Hello all,
Recently purchased a Discovery 3 as spares or repairs that I've been slowly repairing.
I won an upgraded steering wheel with the media controls & cruise control which I've now fitted to replace the poverty spec one I had previously.
From what I've gathered so far, to get the cruise control working, the car needs to have the CC ECU, Clutch Control switch & have it enabled via a GAP IID tool.
I wanted to know 'if' my Disco has any parts already equipped? If so, can anyone point me in the right direct as to where to look? ( I do apologise in advance if it's a stupid question )
Thanks!
Also, what a cracking forum you've got going on here! It's nice to see an active helpful community.
|
 13th Nov 2021 10:55 am |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10598
 
|
There is no CC ECU. It's all done by engine management on these. (as no forward alert sensor)
Yes check you have a clutch switch if manual. Just pull the black/beige trim off from the bottom? and look
Some cars don't even need it enabling.
Powerful on youtube show them just fitting the wheel buttons and it working
|
| 13th Nov 2021 11:48 am |
|
|
jezmoore
Member Since: 27 Dec 2011
Location: newcastle under lyme
Posts: 20
|
I did the same with my 2009 gs model but I had to get the ecu flashed to recognise the new features.
|
| 13th Nov 2021 9:36 pm |
|
|
stephenw46
Member Since: 22 Jun 2011
Location: West Midlands
Posts: 1182
 
|
I had a D3 GS I fitted cruise control auto head lights and windscreen had to be changed for that option but you need to get the ECU configurations turned on
|
| 14th Nov 2021 10:15 am |
|
|
