PhilH
Member Since: 26 Mar 2017
Location: Oxfordshire
Posts: 67
  
|
The Bradley MH35 hitch on my Sankey no longer Damps (its like being re-ended!)
Does anyone know where I can locate a replacement?
Or
According to the video below find an equivalent to the Stablius 637041 damper inside
Thanks in advance.
|
 11th Oct 2021 2:19 pm |
|
|
2011Disco4
Member Since: 23 Feb 2021
Location: Alresford
Posts: 58
 
|
Did a quick bit of research and it seems they don't make that specific one anymore. You might be able to find a used on on ebay.
Not sure if this might be of help? https://www.trailertek.com/trailer-parts/c...mm-dia-eye
|
| 11th Oct 2021 2:47 pm |
|
|
Trailered Movements
Member Since: 16 Jan 2020
Location: East/West Sussex Coast Borders
Posts: 1200
|
Trailer-Tek are an excellent company to deal with, always very helpful and will offer alternatives to expensive 'branded' parts.
Dave 2011 Discovery 4 Commercial SDV6 (Gone)
2010 RRS TDV8 (Gone)
1980 OBLIC 4.0ltr Range Rover (went a long time ago)
|
| 11th Oct 2021 2:52 pm |
|
|
PhilH
Member Since: 26 Mar 2017
Location: Oxfordshire
Posts: 67
|
Thanks both.
I have found that thexmod have the whole assembly in, but at quite a cost!
If i cant find just the damper unit I might see if I cant swap in a 50mm unit instead.
|
| 12th Oct 2021 6:22 pm |
|
|
Stumog
Member Since: 24 Mar 2018
Location: Bristol
Posts: 171
|
I managed to get a damper from the exmod people and an adaptor to convert m8 to m10 off ebay. Good as new
|
| 12th Oct 2021 10:38 pm |
|
|
PhilH
Member Since: 26 Mar 2017
Location: Oxfordshire
Posts: 67
|
Was that the internal damper itself? I haven’t been able to find those.
Neither thexmod or exmod or anywhere else i’ve found so far have those.
|
| 13th Oct 2021 5:59 am |
|
|
Stumog
Member Since: 24 Mar 2018
Location: Bristol
Posts: 171
|
It was LMS Litchfield i got the damper from
|
| 13th Oct 2021 10:06 am |
|
|
PhilH
Member Since: 26 Mar 2017
Location: Oxfordshire
Posts: 67
|
Thanks, they are sadly out of stock.
|
| 15th Oct 2021 7:26 am |
|
|
