VicV
Member Since: 31 May 2021
Location: Zwolle
Posts: 5
  
|
| HLDF can bootloader waiting to start download....05 D3 |
|
hi guys and gals, I am new here, I am have this issue with HLDF can bootloader........on my satnav screen, I found the recovery iso file and burnt in on a DVD and followed the updating steps. The MMM does read the DVD and it also loads and starts the updating process but when the progress bar ends it goes back to the previous error screen with: HDFL Can Bootloader........, I also tried hard reset but after connecting the battery poles back same issue and the car wad running during the process. Please tell me what I am doing wrong ?
|
 31st May 2021 8:29 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6308
 
|
How did you write the DVD, it has to be written as slow as possible .You need a good voltage supply as well, engine running might not be enough.
Flack 
|
| 1st Jun 2021 8:57 am |
|
|
VicV
Member Since: 31 May 2021
Location: Zwolle
Posts: 5
|
The update process starts and the progress bar runs so that means the DVD works rights ?
|
| 1st Jun 2021 9:08 am |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6308
|
Quote:The update process starts and the progress bar runs so that means the DVD works rights ?
No not really it could be a bad disc,or a write error. It should take about 45 mins to load it, thats why you need a power supply.
Flack
|
| 1st Jun 2021 1:50 pm |
|
|
VicV
Member Since: 31 May 2021
Location: Zwolle
Posts: 5
|
Thanks guys problem is solved, I hooked the battery to a charger this time and the software update worked like a charm and everything is working fine again 👍🏼
|
| 1st Jun 2021 2:30 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6308
|
Power supply 
Flack 
|
| 1st Jun 2021 5:33 pm |
|
|
