Member Since: 23 Jun 2018
Location: Newcastle upon Tyne
Posts: 5
20” wheels tyre rub
I have a 2005 discovery 3, I seen a few members are running 285/50/20 tyres on stormers.
Had a set of 285/50/20 Cooper AT3 fitted today and there is some bad rubbing. I don’t know if there’s an issue with my suspension height as other people don’t seem to have this issue. I also have spacer on not sure of the exact size but I can check if it will help.
Any help or suggestions would be appreciated!
11th May 2021 7:59 pm
Tully
Member Since: 23 Jun 2018
Location: Newcastle upon Tyne
Posts: 5
Image attached for clarity
12th May 2021 9:27 am
McZuk
Member Since: 11 Mar 2020
Location: Oltedal
Posts: 16
I'm guessing the issue is when turning? It is probably because og the spacers.
I run 285/50r20 Toyo, (not on stormers, but 50 offset) and don't rub.
Side note, on my suzuki I rub with smaller tires than many others run because of my 30mm spacers.
14th May 2021 8:01 am
Tully
Member Since: 23 Jun 2018
Location: Newcastle upon Tyne
Posts: 5
Your 100% right took the spacers off yesterday and they now clear the arches in full lock. They are very close on the inside though. Pictures below...
14th May 2021 8:32 am
ronp
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15263
I had ran 285/50/20 LTZs on my old D3 on my non standard Stormers and had no rubbing issues whatsoever.
[You would get it though on the later D3s and all D4s ... but that would be on the front chassis leg extensions].
But now looking at the clearance on the upright, you need to be aware that a tyre can flex sideways [especially under hard cornering], so something to keep an eye on.
Maybe even look at fitting thin spacers to increase the clearance....... always on the road less travelled 🚧
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
