Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Technical (D4)

Seat height adjuster
Post Reply  Down to end
Page 1 of 1
aixede
 


Member Since: 22 Nov 2018
Location: Aachen
Posts: 66

Germany 2013 Discovery 4 3.0 TDV6 S Auto Santorini BlackDiscovery 4
Seat height adjuster

Hi,
the driver seat in my newly bought LHD Disco4 S ( manual seat adjuster )
does not hold the height anymore. After some time, the seat has lowered itself.
The lever moves very easily, when the seat is without load, feels like missing
friction. Any idea, what needs to be done ?
regards from frosty Germany
  
Post #222430413th Apr 2021 10:53 am
View user's profile Send private message View poster's gallery Reply with quote
James W
 


Member Since: 27 Mar 2008
Location: Riyadh, KSA
Posts: 3079

Saudi Arabia 

Wait until you see the official land rover engineered solution. You'll love it. I'll try and dig it out
 D4 XS, gone, much loved, never forgotten
2018 FFRR SDV8 Autobiography - Gone to someone with less sense and more time to enjoy it Very Happy
2016 Toyota Hilux Invincible - Liberating experience 
 
Post #222432313th Apr 2021 11:46 am
View user's profile Send private message View poster's gallery Reply with quote
darrind
 


Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2889

England 2013 Discovery 4 3.0 SDV6 HSE Auto Santorini BlackDiscovery 4

If it is the same as the D3 Recommendation it truly is hilarious !

A block of wood and some Gaffer tape Shocked
 Must stop buying shiny toys....  
Post #222441213th Apr 2021 8:46 pm
View user's profile Send private message View poster's gallery Reply with quote
aixede
 


Member Since: 22 Nov 2018
Location: Aachen
Posts: 66

Germany 2013 Discovery 4 3.0 TDV6 S Auto Santorini BlackDiscovery 4

It's the lever.....
When moving out of the car
in my garage, I touch it when sliding through
the half opened driver door....
I removed the plastic cap ( took some time to find
the fixing screw ) and bent it slightly downwards.
It's better now, but not yet the optimum.
Maybe I'll cut it and weld the arm in a lower position.
2cm should be ok and allow function as before.
Issue will be the fixing screw of the cap, as it may
be not accessible anymore.
  
Post #222454714th Apr 2021 3:26 pm
View user's profile Send private message View poster's gallery Reply with quote
aixede
 


Member Since: 22 Nov 2018
Location: Aachen
Posts: 66

Germany 2013 Discovery 4 3.0 TDV6 S Auto Santorini BlackDiscovery 4

Click image to enlarge



new position, better but not ideal
  
Post #222471915th Apr 2021 9:57 am
View user's profile Send private message View poster's gallery Reply with quote
aixede
 


Member Since: 22 Nov 2018
Location: Aachen
Posts: 66

Germany 2013 Discovery 4 3.0 TDV6 S Auto Santorini BlackDiscovery 4

Click image to enlarge


Click image to enlarge


Final solution:
lever cut and welded back, but
15 mm lower and 10 mm forward,
using a small piece of metal as
lever extension .
Works fine, no touch condition
any more when entering or leaving
the driver seat.
  
Post #222493116th Apr 2021 10:32 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site