Member Since: 16 Feb 2022
Location: keighley
Posts: 6
rewiring plugs
Aux plug wiring.....hi fellas, wondered if anyone can help me here...Disco 3 old style radio, AUX switch but no socket.Tried everywhere, defo isnt there....now i seen the pinouts for adding to the back of the radio to wire it, BUT........i have not much idea on electric plugs etc , and i have no clue as to how to insert the wires in the pics below...
I dunno how to pin the plug đ. bought tons of crimps and connectors, unsure how to go on..
Have wired a AUX plug up ready with Left/ right channels and a ground, but unsure how to get the wires into this plug ....thx in advance
3rd Apr 2022 1:08 pm
FrankiE MarmitE
Member Since: 16 Feb 2022
Location: keighley
Posts: 6
sry for the duped pics
3rd Apr 2022 1:11 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10683
Iâm sure GS will or someone will be a lot with the correct terminals to use.
As a trial you could bare the ends, double them over and shove them in the holes right to end.
Then cable tie them to the existing wire.
3rd Apr 2022 1:26 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14135
Hi
Itâs normally best to get some de pinning tools , from basic ones to a bigger range
If u give @martin a shout he may have the correct pins for u, having them ur be able to then see how the pins are secured into the connector , with the de pinning tools it allows u to push the terminal pin tabs aside which will then release the pin
U can buy a loom that has the Aux socket already incorporated which is plug and play , I fitted mine in the temperature console , but see youâve already made a loom up so just need to fit the the wires
As youâve removed the red plastic cover, get a torch and shine it through the connector , u should then be able to see the small tabs that hold the pins in
Managed to find the pic I kept ref different ways the pins can come out
Hope that also helps a little
3rd Apr 2022 5:49 pm
FrankiE MarmitE
Member Since: 16 Feb 2022
Location: keighley
Posts: 6
cheers m8, really appretiated. I get ya, ordered what you said, hopefully will get it sorted, its been bugging me a while...many thx
3rd Apr 2022 7:05 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10683
I think on these you have to move a plastic tab to the outside (front the front), and that then releases the metal terminal.
The metal terminals don't have a tab
3rd Apr 2022 7:27 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14135
FrankiE MarmitE wrote:
cheers m8, really appretiated. I get ya, ordered what you said, hopefully will get it sorted, its been bugging me a while...many thx
Ur more than welcome and glad it helped , indeed always a team forum effort
Plse let us know how u get on
3rd Apr 2022 8:01 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14135
Pete K wrote:
I think on these you have to move a plastic tab to the outside (front the front), and that then releases the metal terminal.
The metal terminals don't have a tab
Hi mate
I must be thinking of another connector that had small tabs holding the pins in , think thatâs half the battle trying to work how they come out , lol
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
