Member Since: 04 Feb 2017
Location: Falkirk
Posts: 352
Crankshaf locking tool - what are you using? For a manual D3
Hi,
Set off to do my timing belt last night with one of these timing locking tools:
However the flywheel locking tool (for a manual g/box) is too large to go through the bell housing hole. Ended up taking the flywheel off to wire brush out the bell housing hole. Still doesn't fit. The hole measures at 34.80mm, the tool 34.98mm:
I could machine down the diameter, but my lathes broken. Looking on the forum this appears a common issue. Looking on line at alternative suppliers I suspect that all the available tools have the same manufacturer somewhere in China.
Question - What crank shaft locking tools have you used successfully on a manual D3 2.7?
Thanks,
AdrianSeries one 1949 - in bits, chassis is strapped to the ceiling in my garage (beside the canoe)
LR 90 - In bits
Disco 3 - currently in bits
Last edited by Breg90 on 20th Feb 2021 4:17 pm. Edited 1 time in total
20th Feb 2021 4:12 pm
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2462
Very common issue has been covered a few times, just get the grinder out and lightly remove a little bit of the surface.
Or you can clean the hole with a dremmel.Andrew
D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE
20th Feb 2021 4:17 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4849
Yeah there's a few about that don't fit easily. As said, take it down a couple of mil and it should be fine. You're gonna need new flywheel bolts now too as they're a one shot only bolt.
ps You didn't really need to lock the flywheel for the timing belts, just the cam's will do as the flywheel won't move. A dab of paint reassures this yµ (idµ - eAµ) ψ=mψ
20th Feb 2021 4:29 pm
Breg90
Member Since: 04 Feb 2017
Location: Falkirk
Posts: 352
Some quality time with some emery paper and the flywheel locking pin for a manual gearbox fits.
Shame it comes over size, looking at other threads it looks like this has happened before.Series one 1949 - in bits, chassis is strapped to the ceiling in my garage (beside the canoe)
LR 90 - In bits
Disco 3 - currently in bits
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum