glasgowdave
Member Since: 05 Mar 2008
Location: Edinburgh
Posts: 11
  
|
When I pair my phone with the car I usually have to put the code in about 3 or 4 times before they connect. When I come back to the car later,sometimes I need to put the code in once to reconnect and other times I have to start the whole 'search for new devices' all over again. They never hook up automatically as they should. I have tried this with 2 Sony Ericsson phones and 1 Nokia, same thing. I read in the book that the car can only pair with 7 devices, does anyone know if this is 7 in total or 7 at a time? Is it possible to clear the memory in the car's bluetooth unit?
Has anyone else had similar problems?
|
 5th Mar 2008 4:02 pm |
|
|
simon
Member Since: 11 Jan 2005
Location: Shropshire
Posts: 18296
  
|
8 phones over BT in total (according to my info - MY08) and the system will drop off the oldest paired phone if another pairing is requested.
Sounds to me like you have an issue with the system itself or perhaps you have not set the device 'LAND ROVER' to be allowed to establish a link automatically in the phones themselves.
Usually by default a BT device will have to request pairing each time unless you set it to 'Allow' on the phone.
Your dealer should be able to reset the D3's system for you - they would need too in order to rid any stored phone numbers etc if selling 2nd hand.
The BT authorisation in the phones maybe worth a try first though.
|
| 5th Mar 2008 4:15 pm |
|
|
Alex08
Member Since: 09 Nov 2006
Location: Glasgow
Posts: 1600
|
I had all sorts of problems with getting even the wired phone to talk. Dealer in Carlisle where I was passing diagnosed a faulty phone module as it wouldn't connect properly through BT either. Module replaced by Taggarts and all has been well since - cradle or BT works without any special encouragement! I had MY07 modules. If you are having persisting probs go back to the dealer with it.
|
| 7th Mar 2008 12:03 am |
|
|
