crannar1
Member Since: 24 Jan 2011
Location: aberdeen
Posts: 1
  
|
| Discovery 3 temperature at max but not overheating |
|
My 2005 Discovery 3 the temperature gauge is at maximum all the time but not overheating, fitted new temperature sensor but get no temperature reading at all and runs rough. Put back in old temperature sensor and temperature back to maximum. At a loss as to what is causing this any help would be fantastic.
|
 19th Dec 2020 11:56 am |
|
|
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8157
  
|
Change the oil temperature sender! It can when others can't,
It will when others won't,
It goes where others don't.
|
| 19th Dec 2020 1:10 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10551
|
Maybe unplugging the oil temp sensor in sump maybe be a temporary solution
|
| 19th Dec 2020 2:43 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
Oil temperature sensor signal is on the same as the water temp. I’m betting you have an oil temp sensor fault logged. Look at the live values and you’ll probably see the oil temp at -20 or -30
Replace the oil temp sensor and the rough running is likely to stop along with the water temp mis reading.  Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 19th Dec 2020 7:47 pm |
|
|
