Buckslany
Member Since: 24 Mar 2018
Location: Buckinghamshire
Posts: 5
|
Struggling with wiring the 13pin plug on a Discovery 3 due to the colours of the wire not corresponding with a standard 13 pin colours. Was wondering whether anyone has a Land Rover wiring diagram for the socket or loom used?
Cheers
|
16th Oct 2020 9:46 pm |
|
|
|
Martin
Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18457
|
https://www.disco3.co.uk/forum/post1882247.html#1882247 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
Last edited by Martin on 17th Oct 2020 8:19 pm. Edited 1 time in total
|
17th Oct 2020 7:41 am |
|
|
L319
Member Since: 14 Dec 2013
Location: Herefordshire
Posts: 2080
|
LR use the standard UK vehicle wire colours to its connectors and for instance black generally denotes earth wires. Aftermarket use ISO 11446 for the 13 pin socket wires which mostly relates to the wiring in the trailers and base white is earth
|
17th Oct 2020 8:40 am |
|
|
Buckslany
Member Since: 24 Mar 2018
Location: Buckinghamshire
Posts: 5
|
Thank you for your responses. Never normally had a problem wiring these in but this is causing some confusion!
The colours of the wires used for example are:
Red/brown
Yellow/brown
Red/blue
Black/white
Red/Grey
Green/black
Along with the standard block colours used as standard.
So I can assume it must be an LR loom? If anyone can help with the colours it would save me using a meter to distinguish!
Cheers
|
17th Oct 2020 9:47 am |
|
|
philm
Member Since: 02 Oct 2016
Location: Manchester
Posts: 732
|
Have you got it sorted? L633 Defender
Range Rover Velar-gone
Discovery 4 Landmark-gone
Gap IID Tool
|
17th Oct 2020 5:16 pm |
|
|
Buckslany
Member Since: 24 Mar 2018
Location: Buckinghamshire
Posts: 5
|
As of yet no, thought i would wait just to see if anyone can throw any light on it!
Cheers
|
17th Oct 2020 6:54 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10368
|
Where are these wires ?
Inside behind the light?
Behind bumper?
By socket. ?
Where did u get loom from if applicable
|
17th Oct 2020 7:27 pm |
|
|
Buckslany
Member Since: 24 Mar 2018
Location: Buckinghamshire
Posts: 5
|
Loom was functioning perfectly with a 13pin plug on. The socket was taken off to replace with a new 13 pin as there was minor corrosion on the pins. No noting was carried out to where any of the wires went assuming it would follow the standard 13 pin wiring. Having fitted looms to Discos before it has obviously been sold as a complete loom rather than homemade but the colour of wires doesn't at the moment make a great deal of sense!
Cheers.
|
17th Oct 2020 8:01 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10368
|
I think you will have to test them.
Or look inside. (For earths)
|
17th Oct 2020 8:15 pm |
|
|
Martin
Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18457
|
My post above linked to my previous post with a full pinout of the 13 pin socket with LR colours.
Edit: your colours don't seem to match the LR colours, so you likely have an aftermarket loom. You might have to end up to either test each wire with a meter to see what it does, or unplug the other ends and see where the various colours go to in the 3 upper sockets. 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
|
17th Oct 2020 8:18 pm |
|
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10368
|
lol
That’s old ford colour coding
|
17th Oct 2020 8:34 pm |
|
|
L319
Member Since: 14 Dec 2013
Location: Herefordshire
Posts: 2080
|
D3/4 is a Ford underneath
|
18th Oct 2020 9:14 am |
|
|
Buckslany
Member Since: 24 Mar 2018
Location: Buckinghamshire
Posts: 5
|
Thank you all very much. Would appear it is a PF Jones loom! Should all be sorted next weekend all being well.
Cheers Dylan.
|
21st Oct 2020 10:05 am |
|
|