discovery3ski
Member Since: 25 Dec 2012
Location: leicester
Posts: 734
  
|
My D3 has a brake light issue. Drivers side I was I thought blowing bulbs. Changed two before I realised they were t blown they just weren’t making a contact all the time. Sometimes if you smack the rear lamp it comes on again. I have cleaned all the fitting. The wiring looks good. I’ve pulled the terminals up and sprayed in contact cleaning fluid. I put it back together and it all works fine. Day or so later people telling me I have a bulb out.....
Can I change the bulb holder by joining a new one into th existing wiring? Is there a rear light loom section that can be bought? It’s driving me nuts. Discovery 3 tdv6 HSE 2007
Alfa GTV CUP
Alfa 156 JTS
Alfa Spider TS
Alfa GT Cloverleaf
Volvo XC70
|
 14th Jul 2021 7:02 pm |
|
|
|
|
discovery3ski
Member Since: 25 Dec 2012
Location: leicester
Posts: 734
|
I pulled the contacts up, cleaned and sanded it all. Used brand new bulbs. May just get one cut out the loom of a breaker and solder it on. Discovery 3 tdv6 HSE 2007
Alfa GTV CUP
Alfa 156 JTS
Alfa Spider TS
Alfa GT Cloverleaf
Volvo XC70
|
| 14th Jul 2021 8:32 pm |
|
|
