DISCO3.CO.UK - View topic - Headlamp flash no worky after 4.5 upgrade. SORTED

Advertise on DISCO3.CO.UK

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Log In

DISCO3.CO.UK > Technical (D4)

Headlamp flash no worky after 4.5 upgrade. SORTED

Page 1 of 1

yogi972

Member Since: 05 Jun 2011
Location: Kineton
Posts: 3372

2010 Discovery 4 3.0 TDV6 HSE Auto Alaska White

Headlamp flash no worky after 4.5 upgrade. SORTED

Hi folks. olyog a 2010 d4

so after the headlamp upgrade last week
my stalk operated flash does not work...
searched the site to death as well as google buy cannot find a definite answer, so here's what I know and tried so far

lights are set at scandinavian .... no flashy on (auto setting )
lights set at canadian .... no flashy on (auto setting)
lights set at drls. ... no flashy

they flash if headlamps are on

car off, you can operate the stalk and hear the shutters activating

have read of another relay needed but this seems to relate to a d3 to d4 upgrade

any help would be muchly appreciated

Last edited by yogi972 on 17th Jul 2023 6:16 pm. Edited 1 time in total

14th Jul 2023 2:08 pm

darrind

Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2863

2013 Discovery 4 3.0 SDV6 HSE Auto Santorini Black

You need an Iid to change the ccf setting - will need Patrick from GAP to give you access to the extra settings available so you can change the headlight settings so the car knows it has a single xenon bulb and not the earlier bixenon setup Must stop buying shiny toys....

14th Jul 2023 5:47 pm

yogi972

Member Since: 05 Jun 2011
Location: Kineton
Posts: 3372

thankyou sir
an email is on its way to Pat

14th Jul 2023 8:30 pm

darrind

Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2863

Must stop buying shiny toys....

14th Jul 2023 10:31 pm

RogB

Member Since: 15 Jun 2018
Location: Mansfield
Posts: 1684

as said above, I had this when i did the upgrade on my old D4, the settings still think there are 2 bulbs so send the flash signal down the orginal wire that now has nothing on the end effectively. Changing it to single via IID cures it but the option is in a 'hidden' menu on the IID 2011 D4 XS 305 MY12 - gone but not forgotten

17th Jul 2023 7:42 am

yogi972

Member Since: 05 Jun 2011
Location: Kineton
Posts: 3372

all sorted, quick email to Pat & team
granted me access to the unconfirmed ccf list

High beam lamps is the only setting i'm going to mess with

although the 4.5 headlamps i have purchased (which now flash)
are the AFS type
but curiously the bulb holder was zip tied to a drilled hole in the rubber cover flange ?
and half the I.D label cut off on each headlight

17th Jul 2023 6:24 pm

Page 1 of 1

Jump to:

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Quote Reply

DISCO3.CO.UK is independent and not affiliated to Land Rover.