Member Since: 23 Nov 2019
Location: NG228QQ
Posts: 19
replacing the cam belt myself
As per the title, I am going to replace the cam belt myself after reading through the "how to"that I found on here, my question is, can anyone please recommend a good supplier of quality belts/tensioner's' parts that I will need, what/who have you guys used when you did your belt, would rather have someone give me a recommendation than just go the usual supply chain way.
Thanks in advance.
Member Since: 23 Nov 2019
Location: NG228QQ
Posts: 19
Thanks, I think it was your "how to" that I read, am I correct?
8th Jul 2020 6:04 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4830
Dayco are the original manufacturer of the belts, tensioners, and cam pulleys. As above Advanced factors will stock these as well as the required locking tools, and don't forget the forum discount yµ (idµ - eAµ) ψ=mψ
8th Jul 2020 6:28 pm
EXCALIBOR
Member Since: 23 Nov 2019
Location: NG228QQ
Posts: 19
Thanks, how do I apply the forum discount when I come to purchase?
8th Jul 2020 6:36 pm
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
I have always used Dayco belts, but recently I am heairng they are not as good as they used to be?
8th Jul 2020 6:43 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10459
I would also recommend changing the oil pump at the same time. If it’s never been done. There is a strengthened type.
Otherwise they can fail shortly after belt change
8th Jul 2020 7:43 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4830
EXCALIBOR wrote:
Thanks, how do I apply the forum discount when I come to purchase?
AF4LRP Just enter it in the window on the basket page!yµ (idµ - eAµ) ψ=mψ
8th Jul 2020 8:33 pm
EXCALIBOR
Member Since: 23 Nov 2019
Location: NG228QQ
Posts: 19
Thanks again guys, will use the code and order a water pump at the same time.
8th Jul 2020 8:55 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10459
Water pump is driven from accessory belt
Oil pump casing is part of the cambelt tensioner mounting
8th Jul 2020 9:08 pm
EXCALIBOR
Member Since: 23 Nov 2019
Location: NG228QQ
Posts: 19
Sorry, I meant oil pump... I have had a quick look on the site, and it seems to list 2 types of pump?
How do I know which one for my motor?
Just ring them and whoever answers just give them your reg or vin number, the guys know what they are doing there.
Just get the full kit.
Flack
9th Jul 2020 8:45 am
EXCALIBOR
Member Since: 23 Nov 2019
Location: NG228QQ
Posts: 19
Cheers, will do..
9th Jul 2020 1:39 pm
Jonmoore1970
Member Since: 19 Apr 2020
Location: Wokingham
Posts: 125
You’ll probably need a special tool to remove the viscous fan. They’re a otherwise.
Check that you have the upgraded oil pump.
Replace crank and tensioner bolts .
Torque bolts to spec....massively important.
Replace the water pump, doesn’t cost much.
Lock the flywheel. Do-able without,but not advisable.
Enjoy and good luck
15th Jul 2020 6:35 pm
EXCALIBOR
Member Since: 23 Nov 2019
Location: NG228QQ
Posts: 19
Can someone please post the link to the cam belt change "how to" I can't seem to find it now.. I saw it before I posted about changing my belt, now I can't find it anywhere, TIA.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum