Member Since: 20 Jun 2020
Location: Leicester
Posts: 2
Height sensor fault
Hello I have an issue with height sensor when I plug fault code reader in its saying left hand front height sensor fault but I've changed it and the wire but still coming up with the same fault and it won't let me do height calibration until this is fixed but can't think what else to look at any help would be great
21st Jun 2020 3:54 pm
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2463
Check the wiring it may have rubbed through
21st Jun 2020 4:11 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10623
You will have to test the wiring back to the ecu.
Which is on drivers side inside
21st Jun 2020 5:02 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4987
Check the voltage at the sensor with your diagnostic tool in "live values". Supply voltage should be 4.90v and the sensor operating voltage is around 2.00v.
If not, pull off the inner wheel arch and inspect the wiring and plugs at the rear of the wheel arch. yµ (idµ - eAµ) ψ=mψ
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum