| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
colinwillis
Member Since: 25 May 2014
Location: Stansted, Essex
Posts: 98
  
|
Hello All!
Got an issue with the adjustment of drivers side wing mirror (powered with powerfold).
The adjustment works left/right.. and downwards (a little), but does not adjust upwards.
(also the powerfold works ok).
I've not taken the glass out yet to take a look, but I'm guessing something internal in the mechanism may be broken?? If it is, can the internal mechanism be purchased separately? Or is it a whole new wing mirror job?
Any thoughts or suggestions?
Thanks!
Colin. 2006 D3 TDV6 HSE Zambezi Silver
2005 D3 TDV6 HSE Zambesi Silver
2002 D2 TD5
1994 300 TDi
|
 8th Jun 2020 10:55 am |
|
|
rowlejohn
Member Since: 15 Sep 2017
Location: Montmorillon, Vienne (86)
Posts: 216
 
|
Motor is available separately. CRP500031 Relocated to Mid France from N. Wales March 2021
Rovacomlite and IDD/ SSD diagnostics user
Previous Landies
3.9 SE Classic
3.5 V8 Disco
4.6 P38 HSE
L322 Vogue HSE
TD4 ES Freelander 1
|
| 8th Jun 2020 7:56 pm |
|
|
colinwillis
Member Since: 25 May 2014
Location: Stansted, Essex
Posts: 98
|
Anyone got any experience of replacing the mirror motor on it's own?
Is it a simple job once the glass is taken out?
Cheers,
Colin. 2006 D3 TDV6 HSE Zambezi Silver
2005 D3 TDV6 HSE Zambesi Silver
2002 D2 TD5
1994 300 TDi
|
| 17th Jun 2020 1:49 pm |
|
|
rowlejohn
Member Since: 15 Sep 2017
Location: Montmorillon, Vienne (86)
Posts: 216
|
Replaced mine last year-Nearside.
The mirror glass does need to be removed, it clips on to the motor head. The clips hold it quite secure and it is pretty straightforward providing you tilt the glass down or up fully. Use your fingers to pull on the edge of the glass firmly and it will pop off. The motor is then exposed, can't remember if it clips in or is retained by a couple of Torx self tappers but all will be clear when the glass is off. No need to remove the mirror body from the car.
To refit the glass, just press it firmly by hand in the centre until you feel the clips engage and double check that it's secure.
The glass has a wiring connector for the heating element. Relocated to Mid France from N. Wales March 2021
Rovacomlite and IDD/ SSD diagnostics user
Previous Landies
3.9 SE Classic
3.5 V8 Disco
4.6 P38 HSE
L322 Vogue HSE
TD4 ES Freelander 1
|
| 17th Jun 2020 2:29 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.
